Meraki

Dunky

Fyi, the calibration error has now been fixed in the dashboard

AmyReyes

Thank you @CharlieCrackle and @EMU_IT for sharing your honest thoughts and feedback. We really appreciate you taking the time to call this out. We understand the concerns around layout and usability, especially when transitioning to a new experience. We are actively working with the Cisco Community team and advocating for improvements to the experience. They’re partnering closely with us, and feedback like this is being shared directly with them as part of that process. Advocating for a clean, usable, community-first experience is a priority for us, and we’ll keep pushing for improvements where we can.

RAID5

Thanks all, in the end we went with a decent spec PC, streaming one camera at a time. Lag is around 1 second. Viewing the entire videowall though causes all the resources on the PC to be used fairly quickly, requiring a reboot of the PC. But viewing one camera at a time is fine.

PhilipDAth

Will it let you change to IP and then back to Mac?

BlakeRichardson

😂

BlakeRichardson

I would say the processor may also be a bottleneck. I have noticed that with an MV72 that records audio that if more than one person is viewing the live feed then only one person gets audio

BlakeRichardson

@Kathy3530 Have you got Wifi settings included in the overall settings you are pushing to the devices?

PhilipDAth

I wrote a script a long time ago that takes a GPS feed from a Raspberry Pi and uses that to dynamically update the vessel's location. Any networked GPS receiver on board should work. https://ifm.net.nz/cookbooks/meraki-gps.html

alemabrahao

Blocking only via Zscaler DNS may reduce some QUIC‑related issues, but it will not reliably prevent QUIC. For consistent results, you need to block QUIC at the network/HTTP proxy level, not just DNS.

BlakeRichardson

This is not sponsored in any way but Jamf is a really good product, so good that even Apple themselves use it internally. It also works really well with Apple classroom.

zack3

Thanks everyone some good suggestions here. I wasnt aware of the DORI section. Cameras and their placement is a new area for me. I am aware its an outdfoor camera for now due to the cold we are demoing the camera indoors. Im going to try and place it in a school lunchroom area in the middle to see how it works out.

PhilipDAth

@DrDray , I appreciate that this is a "volunteer" effort on your behalf. I wonder if it might be worth putting these on GitHub, so people can submit pull requests for updates (or maybe that is too dificult for the average punter, not sure).

vitalypopucchi

working very good

BlakeRichardson · Re: MR33 End-of-Support by July 21, 2026

End of support means if you have faulty hardware then it's time to buy a replacement. Once that cut off date is reached you are on your own. There are two different EOL dates, the first being end of sale meaning a device is no longer sold but still supported. Then there is end of support where the device is no longer sold or supported. https://documentation.meraki.com/Platform_Management/Product_Information/End-of-Life_Notices/Meraki_End-of-Life_(EOL)_Products_and_Dates

PhilipDAth

>AGREED! MILES 4EVA (I am not really cool enough to say "4EVA".... is that even the right way? Or is it "4-eva"? something else? 67

jmeltzer

That’s great to hear. I never received any update prior regarding if this was patched, so thank you for your update.

KathleenJ

There is also a book on Cisco Press called Cisco Meraki Fundamentals

BlakeRichardson

Thanks for sharing how you fixed it, I am sure someone in the future will stumble across this and hopeuflly it saves many hours of head scratching.

PhilipDAth

There is a guide for those who have lost the ability to login. https://documentation.meraki.com/Platform_Management/Dashboard_Administration/Troubleshooting_and_Support/Support/Ways_to_Contact_Meraki_Support#Open_a_Case_Using_Webform

PhilipDAth

+1 to supporting passkeys and FIDO2 hardware keys.

Inderdeep

@PhilipDAth : 2026 is coming .. now its like a Tower 🙂

CarloDC

late comment but congratulations @DanD!!!

RaphaelL

Totaly agree ! Ryan is doing an awesome job

Mloraditch

I think the simplest answer is Essential basically equals Advanced Security and Advantage equals SD-WAN+, there is no option to have Enterprise licensing with Subscriptions. The documentation linked to shows the exact features.

NetworkNînja

The Problem was like you wrote. The Token has been active on another MDM Solution and we deleted now the other Token. Now we need to wait until the Licence are correct again.

About BlakeRichardson

BlakeRichardson

Community Record

Badges