About CarolineS

CarolineS

Got it! Thanks for clarifying. I thought maybe something was wrong here on the community platform.

CarolineS

Hi! Do you mean that you can’t update your profile picture here in the community?

CarolineS

@illusionsacc wrote: I have taken the CMNO course, so wanted next in line. Got it. Next after CMNO (now called ECMS1) is ECMS2. Which has limited capacity (as is very clear in this thread!) - but keep an eye on the ECMS2 page here on the community. This page will be updated when there are opportunities to enroll. Cheers!

CarolineS

Hi @illusionsacc - CMNA is still offered for partners. It covers both sales and technical topics. ECMS2 is for partners and customers, and is purely technical. You may be thinking of our old CMNO course, which was replaced by ECMS1 (yes, a bit confusing!) Cheers!

CarolineS

Hi @Steven-Buck - I'm sorry to hear that you continue to have trouble with this. I have passed your message on to some colleagues who may be able to help. Cheers!

CarolineS

@Jared_P wrote: I also need the mx-100 backs. These are critical, please supply backs for any fronts you guys have. @Jared_P - This request has been passed on to the team that manages the icons. I'll post here when they have an update, too. Thank you!

CarolineS

Hi @Steven-Buck - Please reach out to the webinar team at webinar@meraki.net and they will help you out! Thank you, - Caroline

CarolineS

Hi @nickydd9 - You can now subscribe to the Documentation Digest! Click on the "Documentation Digest" label at the bottom of the post (or just click this link: https://community.meraki.com/t5/forums/filteredbylabelpage/board-id/general/label-name/documentation%20digest) to get to the list of Documentation Digests; you can subscribe from there. (1) Scroll up & click "Documentation Digest" (2) Click to subscribe You can manage your preferences for how often you receive the subscription (Immediately, Daily, Weekly) here, under the "Content using a label I subscribe to" option (I apologize for the subscription preferences UI. It... could use some work 😛 ). Cheers!

CarolineS

@jpowers36 - I have sent your input on as well; sorry I didn’t post an update about that earlier. Cheers!

CarolineS

@RichH wrote: Yes its very frustrating to be in this much love with a product line and company but yet the basic visio shapes we need to promote the product line withing our organization and to other organizations is behind the times. I have seen pre-sales engineers that have the shapes (front and back) for all the current and past lines. Why cant we have them as customers that love the products? Please Please Please give this serious attention so we can finally close this post and get the shapes we need for best practice documentation and promoting the Meraki brand 🙂 Hi @RichH - Thank you for this input! I have sent your comment to the team responsible for Visio shapes, and I hope to have an update soon.

CarolineS

@IgorPodgorny - very sorry about that. Our automated spam checker is over-aggressive sometimes. I have un-marked your post as spam and it is now visible.

CarolineS

We have deployed a fix and believe that the issues are fixed now. Please let us know if you see any oddities on discussion pages (aka thread pages) popping up!

CarolineS

Hi @nickydd9 - At the moment, there's not a way to do this. BUT - I can make it happen. Stay tuned! Cheers!

CarolineS

Hello all - It has come to our attention that thread pages in discussion forums are a bit broken at the moment - weird "reply" boxes showing up, strange "loading" messages, occasionally double headers.... We are actively looking into this with our community platform provider and will add updates to this post as we figure out what's going on. Cheers!

CarolineS

Hi @SOJ - Sorry about that! We are in the process of getting a redirect set up from that page to the new registration URL, which is: https://learninglocator.cloudapps.cisco.com/#/course-details/8694 Cheers!

CarolineS

This marks the end of the month-long Folding@home Community Challenge! We are so thrilled at how much processing power community members were able to donate over this time, bringing the Cisco Meraki team from rank 579 to 🎉 331 out of 250,000+ teams 🎉 across the globe, and ultimately helping to make a difference in the fight against COVID-19. Now, on to the swag! Based on the ranking on Folding@home , the top 3 prize winners among community members who shared their Folding names in a comment here are: First place winner of the Osprey backpack: @ChrisLaird (aka Moravian_College) (Read more about Chris and his Folding setup in our latest Member Spotlight) Second place winner of the desk sculpture: @JanVincent (aka only1jva) Third place winner of the water bottle: @JMalcore (aka Ppipanman) 🎉 Congratulations you three! 🎉 And now, here are the three randomly selected winners from all the participants who’ll each receive a Meraki pin set: @spencerrees, @viking, and @wperry1. Huge thanks to everyone who donated!

CarolineS · ‎06-10-2020

@Mfedele wrote: @CarolineS do you have a Z3C back stencil you can share with me? @Mfedele - I've passed this request onto the team! I realize my response on this is pretty delayed and you probably don't need this any more, but I'm sure it will be useful to someone. Cheers!

CarolineS · ‎06-10-2020

@AndrewB wrote: Hi Caroline, I'm referring to the Topology items linked in this thread and in this blog post: https://meraki.cisco.com/blog/2018/12/our-topology-icons-speak-volumes/ Having these with connectors in visio would be a terrific as high level diagrams for customers often don't need the physical views (with all the ports) available in the existing stencil set. @AndrewB - my apologies for the delayed response on this. I have passed this request on to the team.

CarolineS · ‎06-10-2020

@MichelRueger wrote: It a great Year for Meraki, and you bring a lot of new Meraki Hardware out. But where are the Visio stencil ? Need urgent MR36/46/56 and MS390 Stencils Hi @MichelRueger - Thanks for letting us know! I've passed this on to the relevant team, and will keep you posted.

CarolineS · ‎06-05-2020

@Halalbrother wrote: I'm facing the same issue, what I can do to fix it? Can you please help me with this? Hi @Halalbrother - Sorry to hear this! Please email community-help@meraki.com with specifics about what you are unable to access, and we will help you out.

CarolineS · ‎06-02-2020

@BenLaakso wrote: Is it possible to have the front and rear Visio stencils for the MX devices as well, so they can be used in detailed Visio Diagrams? I'll check with the team who creates these!

CarolineS · ‎05-30-2020

Cleaned up again... what a waste of everyone's time. Though, TBH, I'm surprised this kind of thing doesn't happen more often. I'm going to adjust some of our spam-prevention settings to make it a bit harder for these spammers in the future.

CarolineS · ‎05-29-2020

Thought that might be it. I've removed the recent spam and banned the spammers - but let us know if you find more (you can click "Report inappropriate content" under the little three-dot menu on the post). Wild Friday night over here!

CarolineS · ‎05-29-2020

Hi! You pinged?

CarolineS · ‎05-28-2020

Thanks @Nick! I'm happy to be the recipient of these reports (posting here in Off the Stack is fine); I'll pass them on to our web team. Cheers!

CarolineS

Community Record

Badges