Group Policies, traffic priority setting not available

francktls
Getting noticed

Group Policies, traffic priority setting not available

Dear Community,

 

Do you know why sometimes it's possible to set a priority (high, Normal & Low) in a traffic shaping rule and sometimes this menu doesn't exists ? See  below the difference between 2 different dashboards, same advanced license.

Maybe I missed something easy. Many thanks for your help.

Franck.Group policies configuration - Meraki Dashboard - Google Chrome_2.jpg

3 REPLIES 3
NolanHerring
Kind of a big deal

Are these from the same network?

The one on the right seems to be on a network with an MX and the one on the left seems to be from one without an MX appliance. However I just tested and I have two networks, one with an MX and the other with just access points.

I wasn't able to replicate your issue myself, which is odd. Maybe the firmware versions of the network affect that feature?

The only place I could find 'priority' was under the SD-WAN & Traffic Shaping for the MX, if I created a custom rule there.
Nolan Herring | nolanwifi.com
TwitterLinkedIn

I think @NolanHerring  is onto it.  Your can only have this setting when there is an MX in the network.

Sorry guys, both networks have MXes and both with advanced license...

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels