New articles:
Change: New article.
Change: New article.
Change: New category.
Access Manager:
Change: Added "It may take up to 24 hours after claiming your Access Manager licenses before you see the Access Manager menu item in your organization dashboard."
Secure Connect:
Change: Updated data center name for Tokyo, JP: "NRT2".
Security & SD-WAN:
Change: Updated prerequisite: "'Proxy to Upstream DNS' Enabled for the respective subnet".
Change: Added section "Account Unlinking".
Change: Added section "Unlinking an Account".
Switching:
Change: Added "For Catalyst switches (including MS390) on CS firmware, it is required you power down the entire switch stack before adding / replacing a new member to avoid packet forwarding or configuration sync issues. This is only a requirement for stacks on CS firmware and not needed for stacks running IOS-XE firmware."
Change: Added "All changes to configuration made by Dashboard will be logged in Organization > Monitor > Change Log and associated with the default administrator for the Dashboard organization."
Change: Added "Region-specific power cords are not included in the box. Order the appropriate power cord separately: MA-PWR-CORD-US, MA-PWR-CORD-EU, MA-PWR-CORD-UK, MA-PWR-CORD-CN, MA-PWR-CORD-IN, MA-PWR-CORD-BR, MA-PWR-CORD-TW, MA-PWR-CORD-AU, MA-PWR-CORD-AR, MA-PWR-CORD-JP".
Change: Added "C9500s cannot be onboarded as a stack. Please remove the StackWise Virtual configuration, reboot the switches, and onboard as standalone switches."
Change: Added "Help us improve your experience. Complete this quick survey to share your feedback on Cloud Monitoring or Configuration Source: Device."
Change: Added "To onboard Catalyst switches using Cloud Management - Configuration Source: Device, select "Try new version" in the top right corner of the Inventory page to access the new onboarding experience."
Change: Updated reserved IP address range: "Subnet (172.16.0.0/16) used for underlay, this subnet can be changed during fabric creation in the wizard."
Wireless:
Change: Added "Access points that are not operating on MR32.1+ firmware versions will continue to see previously available limited PoE information."; added "Supported APs".
Change: Added "RADIUS Failover and Recovery Logic"; added "Extended Local Auth Caching"; added "Operational Distinctions".
Change: Added "Only Meraki Organization administrators with full read and write access can activate the integration, per the Spaces setup documentation. Due to this, SAML dashboard administrators cannot action the integration process."
Change: Added section "RADIUS Accounting Device Profiling".
Change: Updated number of sponsor guest mail domains: "The maximum number of sponsor email domains that can be added at any one time is 50."
Change: Added "Existing onboarded access points can be moved to another network only after changing the Access point assignment. Follow the guidelines for access points at Moving Devices between Networks. APs that are moved prior to changing the access point assignment will automatically move back to their original network."
Change: Added "If a network has SuiteB - 192 Bit SSID configured on a lower number SSID, Dashboard will show an alert stating Wi-Fi 7 cannot be enabled because the following SSIDs do not meet the security requirements."
Cameras:
Change: General article re-write.
Change: Added release notes for up to v1.26.7.
Systems Manager:
Change: Added "This portal is accessible via enroll.meraki.com to provide a method of manual enrollment."
Platform Management:
Change: Added section "RMA Processing For Outdoor Cameras".
Change: Added "Placing a client on the "Block list" will block both LAN and Internet traffic."
Change: Added "If your packet is traversing over an IPSec (non-Meraki) VPN, you will need to account for up to 100 bytes of overhead."
Change: Added section "2026 Public Holidays for Mainland China".
Change: Added "Potential Hardware Fault".
Change: Added note regarding beta participants being transitioned back to the original Organization Summary page.
Change: Added "The same policy can then be applied to all the selected client(s). Note: The tool will default to "Normal" upon first opening as selected clients might have different existing policies applied to them."
Change: Added "Bad IPv6 Assignment Configuration".
Change: Included Secure Access.
Change: Added "For cloud-managed C9000 in device configuration mode, client visibility requires a DNA Essentials license. Application visibility requires a DNA Advantage license".
Change: Added "Each API call can update up to 500 Networks."
