cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

VLANs

SOLVED
Highlighted
A model citizen

VLANs

VLANs would help maintain PCI compliance in small business where they have multiple devices plugged into the firewall or switch along with a card reader. 

 

For this use case, since card readers do not typically support VLANs, the ports on the firewall or switch should be able to add and remove the tag as necessary.   Also this use case would benefit by blocking all traffic between VLANs.

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Meraki Go Team

Re: VLANs

@DHAnderson @Roska @olavrb @datagen24 

 

2.14.1 was just released last week but we were able to expedite the release of 2.15.0 which is now available for iOS and Android. This release allows for configurable VLANs on individual GS110 switch ports. 

Release notes:

 

- VLANs can now be configured on individual GS switch ports
- General bug fixes and stability improvements

 

James Wilson
Meraki Go | Americas Theater

View solution in original post

17 REPLIES 17
Highlighted
A model citizen

Re: VLANs

I agree, +1 on this.

Highlighted
Meraki Go Team

Re: VLANs

@DHAnderson & @Roska - VLAN support has now been released in the latest version of the Meraki Go mobile app.

James Wilson
Meraki Go | Americas Theater
Highlighted
A model citizen

Re: VLANs

Screenshot_20191223-213719.png

 When I tried to save the VLan, I got an error saying that VLans were not supported, so I couldn't save it.

A model citizen

Re: VLANs

I tried creating a VLAN again today, and it worked!

 

I'm not sure if it was a firmware update (no way to see firmware version), or a reboot of the access point (I had to move it to another location).

 

- Dave

Highlighted
A model citizen

Re: VLANs

This is the first time I am getting time to play with my full stack of Meraki Go equipment in a while.

 

I set up a VLAN on a test SSID today.  When I try to connect to that SSID, I cannot get an IP Address.  I cannot see anywhere to add another DHCP pool for the VLAN, or apply the VLAN to a port on.my switch or firewall.

 

What am I missing?

 

- Dave

Highlighted
New here

Re: VLANs

I cant figure this out either. I think it was partial implemented only in the AP side of the stack. but the switch side and the GX do not seams to have any config options....

Meraki mind chiming in here?

Highlighted
A model citizen

Re: VLANs

When I made my post, I got a PM from the Meraki Go team that it was coming.

 

I haven't heard much since.  I want to bring this product to small clients who have payment terminals, but I can't as PCI calls for separation of payment terminal traffic from all other traffic.  VLANs are the way to accomplish this.

 

Highlighted
Here to help

Re: VLANs

Would also like more info and documentation about VLAN.

On the product page of GS110 it says that 802.1Q VLAN tagging and trunking is supported, but I can't find any documentation regarding how to set that up on the switch itself.

In the app I can only find VLAN settings for a SSID if network mode is set to bridged. But can't find any VLAN related settings for the switch.

Highlighted
Here to help

Re: VLANs

@DHAnderson 

Your screenshot from the app regarding VLAN settings: Thats on a Wifi / SSID right? I could not find any VLAN settings on the switch itself in the app.

Highlighted
A model citizen

Re: VLANs

That is right.

I cannot find any VLAN information on my switch or firewall either.
Highlighted
Meraki Go Team

Re: VLANs

@Roska @DHAnderson @olavrb @datagen24 - 

 

VLAN configurability is not yet enabled in the Meraki Go mobile app for GS or GX (only GS via SSID tagging, GS & GX are fully automated on backend) but we are working to deliver full VLAN configurability across all GR, GS, and GX products ASAP. I will keep this thread updated as we progress towards a definitive release date. 

 

Thanks to each of you for your feedback!

James Wilson
Meraki Go | Americas Theater
Highlighted
Meraki Go Team

Re: VLANs

@Roska @DHAnderson @olavrb @datagen24 - 

 

Coming in release 2.15.0 the ability to tag VLANs on the GS110 will be available.

 

At the time of this release, VLAN tagging will be enabled on the Meraki Go GS110 network switches as well as both the GR10 & GR60 access points.

 

VLAN configurability on the GX20 will NOT be included in this release but updates around this feature request will be announced soon so stay tuned!

James Wilson
Meraki Go | Americas Theater
Highlighted
Here to help

Re: VLANs

@JamesMW

Any ETA for app v2.15.0? Been three weeks now since the "announcement".
Highlighted
A model citizen

Re: VLANs

I have heard that 2.15 was targeted for this week.

Highlighted
Meraki Go Team

Re: VLANs

@DHAnderson @Roska @olavrb @datagen24 

 

2.14.1 was just released last week but we were able to expedite the release of 2.15.0 which is now available for iOS and Android. This release allows for configurable VLANs on individual GS110 switch ports. 

Release notes:

 

- VLANs can now be configured on individual GS switch ports
- General bug fixes and stability improvements

 

James Wilson
Meraki Go | Americas Theater

View solution in original post

Highlighted
A model citizen

Re: VLANs

Looks great! Data and Voice for Access ports, and multiple VLANs for Trunk ports!

Good job!
Highlighted
Conversationalist

Re: VLANs

@JamesMW Will the GX20 VLAN configuration be enabled in the next release? It looks like Meraki is on a 2 week sprint cycle which puts the next update this week (if I'm guessing correctly).