Hi @jumbojake , Thanks for your post and apologies for the inconvenience. I was glad to read that you found a work-around (spot-on).   Based on your description, I believe it aligns with an issue we were having which is marked as solved around 2h ago by our development team. Could you kindly: 1) Check if the issue remains? 2) If yes, raise a case with support so we can investigate further? Thank you have a great day ahead of you. ... View more

Fair enough @jayllnyc, and thank you for sharing that.   I believe part of these challenges came from Meraki Go support hours. Considering your message that you spoke with someone throughout the weekend, that was a Support Engineer from our Enterprise solution going above and beyond trying to help you.   I trust Scott Hyatt will be able to provide more accurate and tailored information regarding your case.   Thank you! ... View more

Hi @jayllnyc,   As you can note, this post has several very similar scenarios, but they aren't quite the same. Some users can't access the portal, some users can but can't add new devices. You mentioned one of your SSIDs were working and another were down. Both scenarios causing big impact to both operations, but not quite the same behaviour.   My goal was to reply OP's posted, where he informed that he was "Unable to access Meraki Go Configuration", and based on his replies and what I got it from the development team, this should be back working/solved.   If you are still experiencing any issues, I apologise for that, and I kindly ask you to continue to work with your assigned Engineer through the case you mentioned you managed to get it open (thank you very much for that).   Thank you for your understanding.  ... View more

Hi @StephenYork , I'm glad to see tha the issue was partially resolved. About item 6, I feel it was a diff issue that now should also be resolved.   Can you please confirm if you are still failing to "get the web portal to work"? If it is back to working, I will mark your response as solution. Thank you very much for your support and patience on this matter. ... View more

Hello! This change (Local Status Page (LSP) mandatory password feature) was developed to enforce EU RED (Radio Equipment Directive) compliance. It requires networks created after August 1, 2025 to have mandatory passwords set for Local Status Page access. It prevents the use of device serial numbers as passwords, which is considered non-compliant under EU RED regulations. The auto-generated password acts as a soft block to the Local Status Page, prompting users to set their own password as required under EU RED. The public documentation will be updated shortly. ... View more