Register or Sign in
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
- About speakerfritz
Community Record
11
Posts
3
Kudos
0
Solutions
Badges
4 weeks ago
1 Kudo
Meraki go app network icon for physically attached devices pick physical network name pick reserve IP addresses at the lower left select the + sign at device IP address reservations pick select from list select the device enter the IP address you wish to reserve for the device pick save
... View more
4 weeks ago
RAV1 are you going to connect AP directly to the firewall? I initially did that and had warning messages related to the AP having the FW internet port address. so I switched the AP's from bridge mode, the default, to NAT mode. that fixed the warning messages....but...since I have 2 APs, the LAN was behaving like two networks due to the APs now providing DHCP. so, I bought the switch, put the APs back into bridge mode and no more warnings and the LAN behaved as 1 LAN.
... View more
05-27-2022
05:32 AM
thanks for the comments UARiT 250 thru put on the GX20 is fine for us right now. 2 folks working from home. end to end internet speed test is 220+- and our network has never been that fast. I moved from a netgear "super duper" gaming router that claimed 1GB through put and worked decent....but internet speed test were never better than 150+- and the router has some known bug that requires forlks to hard reset it weekly. no matter what firmware used. the meraki go network setup firewall+switch+APs has been working extremely well. I was push out of my prior network equipment that I had bought .....less than a year after buying...they went EOL/EOS and bricked all the routers. They must have been in violation of some open source rules or something....I have never seen a router company brick their equipment at EOL/EOS.
... View more
05-23-2022
08:24 AM
So its 2022 and Meraki Go has been out for a few years. After buying a GX20, 2 GR10's and a GS110-8P I am now wondering how much useful life is left on this model/line before we get notified of end of life and out of support? I recently had this happen with another brand which after they bricked the hardware....I was forced to buy replacement hardware. Since Meraki Go has a cloud interface...its unlikely this equipment will work once EOL/EOS is announced. Its like you have to join the party at the beginning to get a decent return on investment. Paid almost 500 for everything in May of 2022.....any rumors of remaining useful life on the GX20, GR10, GS110?
... View more
05-22-2022
09:47 AM
I had a version of this problem tried to use 2 ap’s as mesh gateways with the firewall. didn’t work very well with out a switch had to use NAT on AP’s doable NATing turned one network into 2 bought the switch and put the APs in bridge mode 2 networks became one all iswell
... View more
05-22-2022
05:54 AM
resolved In the Meraki cloud management software the printer shows up as some random 8 diget host name. In the meraki cloud software I renamed the printer to the bonjour name (the bonjur name is what the PCs look for) and I was able to turn on the mesh network and print. I am also able to see the printer in network neighborhood.
... View more
05-21-2022
07:01 AM
If I use a single AP,printer works fine. if I use 2 APs as meshed gateways with same ssid, printer is not reachable. Meraki go security gateway, Meraki go switch, 2 Meraki go AP’s HP laser printer APs are in bridge mode 1 wireless network with both APs broadcasting. Any ideas. right now, until I figure out the problem, I only have 1 AP broadcasting my wireless network. Printer works if I do that. If I broadcast from the second AP, printer not reachable.
... View more
05-19-2022
06:44 PM
2 Kudos
solved if AP's are plugged directly into security gateway, NAT is better if APs are plugged into a switch which is plugged into security gateyway, the default setup will be bridge mode. so the problem was that the software setup assumed everyone would use a switch between gateway and APs . ordering a meraki go switch so that my setup would be standardized.
... View more
05-19-2022
11:39 AM
can the USB ports on the Meraki go Security gateway and Meraki go AP's be used for anything (file sharing, printers, etc)?
... View more
05-19-2022
11:37 AM
I have had a opendns home version account for years. just recently purchased he meraki security gateway and 2 meraki APs the meraki security gateway documentation and software notes discusses the optional meraki security subscription which uses cisco umbrella (formally opendns). the functional features of the meraki security subscription and opendns appear to be identical. the only difference I see is that the meraki security subscription basically integrates the management of cisco umbrella into the meraki app and website. vs for the openDNS, you have to go to openDNS website to manage your settings and review stats on the vulnerability aspect of your settings to your network. am I missing any other features that the meraki go security subscription provides that opendns does no provide?
... View more
05-19-2022
11:28 AM
good day. I got my Meraki Go Security Gateway + 2 Meraki Go Access points setup to work as a meshed wireless network and verified proper functionality. I can also see end points split being both access points...so I think its setup correctly. negative feature... .if I setup the access points in bridge mode, I get the wan ip on the AP external interface and I get info that the AP is on the internet with the recommendation to use NAT. Although the conditions of my goals match the bridge use. if I setup the access points in NAT mode, I wind up with a second set of DHCP servers (one for each AP) and an new network IP range of 10.X.X.X is created. when this happens...the security gateway has no end point info at the software console and I have to go down one level into the AP's to see client activity. when it was in bridge mode...all the end points were visible at the firewall console software and details of use by end points was centralized. the default install set everything up for the APs to be in bridge mode...but according t the messages and warnings....NAT mode is preferred. so right now my security gateway external IP is a provided by ISP in the 173.X.X.X range. my security gateway created a 192.X.X.X network on its internal interface. My 2 APS have a 192.X.X.X IP on their WAN interface and my 2 APs are providing DHCP in the 10.x.x.x range to my wireless network. so if I enable the 2 APs to be in bridge mode, both AP WAN interfaces show my Security gateway external IP address, and the security gateway provides DHCP to the entire wireless network, DNS is from the gateway re-direct to openDNS, their is no 10.X.X.X network, and I can see all the end point info at the security gateway. so its not clear to me why 1. the default setup puts the APs in bridge mode 2. if I do a manual change from bridge to NAT, the comments for why I should use bridge are all met 100% and the comments as to why I should use NAT are not met 100%. in other words, based on the comments, I should be using bridge mode. 3. but, there are some messages while in bridge mode, indicating I should be in NAT mode. one message relates to the AP WAN interface having the ISP IP address (same as the firewall). while in bridge mode, the APs are behaving as if they have been configured for being on the internet directly. As I type this, I am in NAT mode. I would be interested in any comments / opinions.
... View more
My Top Kudoed Posts
