cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

VPN of meraki Full stack

Getting noticed

VPN of meraki Full stack

Hi All,

 

can somebody enlighten me on my meraki for 2 sites? Below are the details;

 

for Main office (HUB already enabled)

1-MX84

3-MR33

1-MS

 

for branch (Spoke?)

1-MX64

2-MR 18

1-MS

 

if I enable the site-to-site VPN will all other meraki appliance be included with the VPN?

5 REPLIES 5
Here to help

Re: VPN of meraki Full stack

Hi! The VPN you connect between your sites will only add the subnets you allow between the vpn connections.

If you have one subnet spanning all devices, then yes, all Meraki appliances will be included 😉
Head in the Cloud

Re: VPN of meraki Full stack

Hi @ludwigbery 

 

I understand when we establish "Site-to-site" AutoVPN between two locations.

The Local Subnets (included In VPN) are exchanged and the devices belonging to these subnets can talk to each other.

 

 

Regards
Ajit
ajitsnw@gmail.com
https://www.linkedin.com/in/ajitkumarverma/
Kind of a big deal

Re: VPN of meraki Full stack

You have to set at least one site to be a hub.  The second site can be either a hub or spoke.  Once you have done that they will built a VPN automatically.

 

 

Kind of a big deal

Re: VPN of meraki Full stack

Getting noticed

Re: VPN of meraki Full stack

@Rebry 

@AjitKumar 

@PhilipDAth 

 

thank you so much for the inputs!

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.