Configure MX84

sj093
Getting noticed

Configure MX84

Hi, I'm new to the meraki world and I have a mX84 that I have to configure I would like it to be simple configuration no camrode monitoring nothing computers and Acces PointQuelqu'un canHi, I'm new to the meraki world and I have a mX84 that I have to configure I would like it to be simple configuration no camrode monitoring nothing computers and Acces PointQuelqu'un can help mePlease?

3 REPLIES 3
Inderdeep
Kind of a big deal
Kind of a big deal

@sj093 : have a look on the below video 

https://m.youtube.com/watch?v=34iFTL82hmE

 

setting up DHCP, static IP, VLAN, PPPoE, proxy and so on ... check below 

https://documentation.meraki.com/MX/MX_Installation_Guides/MX84_Installation_Guide

 

Check all things related to MX below

https://community.meraki.com/t5/Security-SD-WAN/New-to-the-MX-Start-here/m-p/98941#M24787 

 

 

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com
rwiesmann
A model citizen

good to start with the meraki documentation

https://documentation.meraki.com/

 

For the MX you will have a lot of different topics in order to configure and what you need:

https://documentation.meraki.com/MX

 

Just to have it up and running use the quick start guide

https://documentation.meraki.com/MX/MX_Quick_Start

 

but all depends on what you would like to achieve?

Inderdeep
Kind of a big deal
Kind of a big deal

@sj093 Hope all clarifies!

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels