Site-to-site VPN connectivity

CMIT-Dub
Conversationalist

Site-to-site VPN connectivity

I've configured site-to-site VPN between two MX64Ws but must have missed something. My Site-B is configured as 'Spoke' selecting Site-A as the hub. Site-A is set to 'Hub'. VPN status is green between devices. Both IP ranges are different, one 10.10.... and the other 192.168.... Utilizing Windows 10, I map from computer/Site-B to shared info on computer/Site-A it will not connect. What am I missing? It has to something simple.

3 REPLIES 3
DarrenOC
Kind of a big deal
Kind of a big deal

Hi @CMIT-Dub , have you specified what subnets you want to participate in the vpn?

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
DarrenOC
Kind of a big deal
Kind of a big deal

Go to Security SD-WAN > Configure > Site to site VPN > Local Networks.  You should see you local subnets there. Select which ones you want to participate in the vpn

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
CMIT-Dub
Conversationalist

Those are/were set. Shouldn't I be able to ping the remote site subnet?

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.