Connecting to Multiple site - site VPN in Auto vpn

Prakash_blr
Here to help

Connecting to Multiple site - site VPN in Auto vpn

Prakash_blr_0-1656730778671.png

 

One of our MX64 connects to two sites. i did reset and removed from template and rebind. restarted 

 

Please help in clearing this issue

 

3 REPLIES 3
DarrenOC
Kind of a big deal
Kind of a big deal

Hi @Prakash_blr 

 

What do you have configured under Security & SD-WAN > Configure > Site to site VPN

 

If set to Mesh (like below) then toggle to Spoke and select your designated Hub.

 

Mesh (as the name indicates) builds a VPN with all Hubs and Spokes

 

917B7B2E-D4DE-426B-8427-EF43F3E31DC3.png

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
Prakash_blr
Here to help

Prakash_blr_0-1666176105726.png

We have more than 50 mx64 but only this mx64 is not connecting through. we have templates and each have auto cpn to our dc mx64 

Prakash_blr
Here to help

HI, Is there any way to get logs from meraki dashboard to check this issue

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels