Below are the most important changes to our documentation between September 30th and November 10th:
Using the Cisco Meraki Device Local Status Page
Change: Added note stating that spare when directly connected to a LAN port on a Spare MX in active MX warm spare deployments will present the local status page of the Primary MX
MX Addressing and VLANs
Change: Added note explaining stored VLAN behavior when enabling VLANs.
3G/4G Cellular Failover with USB Modems
Change: Added note explaining how to pull USB ID via a Windows machine.
MX Uplink Settings
Change: Reworded notes on changing WAN IP from dashboard on single circuit MXs.
Cisco Meraki and Umbrella Integration - MR Advanced/Upgrade License
Change: Added note on free trial availability.
MS Switch Access Policies (802.1X)
Change: Added supported RADIUS attributes sent by MS switches to RADIUS.
SSID Tunneling and Layer 3 Roaming - VPN Concentration Configuration Guide
Change: Noted support for SSID concentration in MX routed mode.
Creating and Applying Group Policies
Change: Added additional support for MS
VPN Full-Tunnel Exclusion (Application and IP/URL Based Local Internet Breakout)
Change: Updated with Z1/Z3 support as well as firmware dependencies.
Configuring Network Alerts in Dashboard
Change: Added note stating that tags must be created to be able to alert for specific port(s).
Meraki and iOS 14 MAC Address Randomization
Change: New article
Meraki Insight Introduction
Change: Added notes on licensing and physical MX support.
Summary Report Overview
Change: Added detail on security appliance utilization graph.
Using the License Calculator
Change: Added link to license calculator
Location Deployment Guidelines
Change: Refreshed article
MR44 Datasheet
MR44 Installation Guide
Change: New articles
MA-UMNT-MR-A3 Aruba Mounting Adapter Installation Guide
Change: New articles
Low Power Mode
Change: MR44 is the only Wifi6 AP that supports low-power mode.
Meraki Cloud Sizing and Scaling Considerations and Best Practices
Change: New article