Your problem is Tx power. 10 dBm is too low and 24 dBm is too high. Keep it to around 17 dBm.   You'll get a lot of misleading info about Tx power from vendors/integrators/et al. Wi-Fi is a two-way communication medium so Tx power needs to be similar on client and AP. Most clients are in the neighborhood of 17 dBm (50 mW).  ... View more

Yeah, 6 months passed that I have NBAR turned off, no one understood that it was turned off 😄 even I forgot to turn it back on   Can't use it and now it gave us bugs for nothing much. Would be great if they revert that back ... View more

You will need WPA3 for WiFi 6E and 7 deployments for 6GHz. Other than that, I would also recommend a different SSID for known supported devices. ... View more

Thank you so much for verification. This help clear thing up a lot. ... View more

As @Brash has mentioned, you need to block QUIC to control this.  Traffic on UDP port 443. ... View more

thank you ... View more

We are an important organisation and have hundreds of MR46 in production. I confirm this random issue, as many others in this post. Some APs are negotiating at 100 Mbps FastEthernet, not Gigabit. After some times, they are suddenly negotiating back to Gigabit. We have Meraki switches only. When we run the cable test from the console, it always finished without any error.   We have also this issue in a new buildings, with new wiring that has been checked with a professional network tester.  The UTP cable connections is not shielded, so I'm wondering if shielded S/FTP cable is adviced to help with this issue.   If it's not a wiring issue, it should be adressed and analyzed by Cisco. They are too sensitive for normal prod conditions. ... View more

This is correct, I was a SAML account. I ended up creating an additional login that was not SAML and got it no bother.  Thank you @JesseN  ... View more

After upgrade third party vpn stopped working. Appears as up but there are no traffic between peers. ... View more

Hi Jhay015,   As others have stated, if the MR is still registered to previous owners on the Meraki dashboard you will not be able to use the device. If you can't reach the previous owner to unregister the device from their dashboard then honestly the only thing you can do is e-waste the unit. Meraki is a fantastic product and my only other suggestion is to reach out to a Cisco reseller and purchase a new MR. ... View more

This issue is no longer present. Back to the regular 3 categories: Stable, Stable RC, and beta. ... View more

We have upgraded multiple sites to 29.5.1 with no issues. We made sure client load balancing was disabled as well. This fixed a number of disconnect issues and guest registration through ISE.  ... View more

Looks like this is now available to enable. I was able to toggle it on a couple networks without issue late yesterday. ... View more

I would like to nominate Evan Lane at Honibe who is helping us manage our IT infrastructure thru a hurricane that went thru Atlantic Canada. Just now slowly getting some electrical, telephone and internet services. It will be a slow process. I may have missed the contest but still wanted to acknowledge him. Hard to enter when you have no power, cell and/or data services. @AmyReyes  ... View more

Hi Can I do step 5 during business hours ?  and do the combine of template without disconnect clients ? ... View more

Hi BrandonS,  I tried turning it of and got my view back, but if I turn it on again it's the same. I will contact the Support. Thanks for your help! ... View more

When I configure APs, I make sure the switch port the AP is connected to is configured for access mode, on a VLAN that has DHCP, and has access to the internet.  I usually use a vlan configured for user desktop PCs.   ... View more

Thank you Claes_Karlsson. It was firmware issue. After update everything works! ... View more

That would be an option. But we are talking about a current deployment.   Another workaround I found was using tags on APs along with scheduled availability on the SSID, but still.. not as convenient as a "Disable AP" option.   Time for the wish button I guess. ... View more

Its just a management/ alerting  setting. You can set it at the switch settings ... View more

I'm following closely! We see these gaps also (mainly reported because video streaming is popular at the moment) but Wifi coverage is very flexible at this customer, so no business affected ..   Will love to hear what engineering has to say (and how they will discover what's wrong) .. ... View more

Happy to be part of the community.    ... View more

Also check if all your APs were part of the same Meraki order and that this order does not contain equipment that you don't want to add to the dashboard.  Claiming the order itself on the dashboard will add all the APs automatically.  ... View more