Looks like it will happen 🙂 Products - Cloud Management for Catalyst FAQ - Cisco ... View more

any update on these thread? i know seems old.    Thanks ... View more

Hi folks,   I'm really new to Python programming but I just put this together to achieve a similar thing, I think. I have used colleagues ideas and trawled the StackOverflow site for ideas and inspiration. It will return any enabled SSID and print details about it. Of course it can be sent to a file if needed rather than just printed to a screen. Hope it helps someone.   from time import sleep from rich import print as rprint try: networksResponse = dashboard.organizations.getOrganizationNetworks( orgId, total_pages='all' ) for network in networksResponse: z = network['productTypes'].count('wireless') if z > 0: response = dashboard.wireless.getNetworkWirelessSsids( network['id'] ) configured = [n for n in response if n['enabled'] == True] rprint(network['name'], "-", configured) sleep(.1) except meraki.APIError as e: print(e)   Kind regards Richard ... View more

did you just allow vlan 1 as native? or just allow vlan 1 on the vlan list with another native vlan? ... View more

Bumping this thread as I got hit by this very issue this week. Workaround to get rid of the outdated policy was indeed to reboot the APs. ... View more

Sorry I am about 3 years late here.  For the option to appear on your dashboard, you have to have the correct Meraki AP model.  Some models are not compatible with the "PSK without RADIUS" configuration, so having them on your network will remove that option.  I confirmed this with Meraki Support - also, 2 of my networks only have the MR55 and MR56 models, so I have that option on those networks but not the one where I have the MR34 models.   KB:https://documentation.meraki.com/MR/Encryption_and_Authentication/IPSK_Authentication_without_RADIUS + KB has a requirement that all APs in the network should be All APs in your network must be Wi-Fi 5 Wave 2 (MR20, MR30H, MR33, MR42, MR42E, MR52, MR53, MR53E, MR70, MR74. MR84), Wi-Fi 6 (MR28, MR36, MR36H, MR44, MR46, MR46E, MR56, MR76, MR78, MR86, MR45/55), Wi-Fi 6E (MR57, CW9162I, CW9164I, CW9166I) or newer. ... View more

Hi,   Thanks@MarcAEC for sharing, I stumbled upon this and the solution still seems to work good.   And it looks like the sharing of the 'disabled' routes is expected behavior as also described in the knowledge base:   https://documentation.meraki.com/MX/Networks_and_Routing/MX_Routing_Behavior   Advanced Configurations->Static Route Tracking: The route tracking mechanism only has local significance, which means, that the status of the route doesn't influence whether the route is advertised or not and it won't affect the routing on the remote end of the VPN.   Cheers ... View more

@MarcP is there any way to have the networks automatically set time to the local time zone? I have a bunch of networks that span all over the US and it'll be time consuming to manually adjust each one of them.  ... View more

Let's all 'Make a wish' shall we, as I could do with this too ... View more

33 Switches (couple of stacks) , 150 Accesspoints. But regarding to your posts, decided to put all in one network 🙂 ... View more

Dear Bruce,    Good to see you here, i have been searching about MX revert to previous configuration after it lose connection to Meraki cloud. As i have seen you mention in this comment, Would you mind give me some idea about how to disable this feature? i saw in Meraki document and it say we can disable this. Would you mind tell me if you have experience with this case? Behavior during Connection Loss to Cisco Meraki Cloud - Cisco Meraki   Best Regards, Joy ... View more

OK, makes me sad 😞 But didn´t find something, so already thought so. ... View more

Dear MarcP, You done awesome setup. i have 1 ISP and 2 mx84 main and spare. can you share overall setup how is config? now my main FW working fine but i unable to setup one the spare FW.  Thank you! ... View more

i am also facing the same issue for mykohlscard login. ... View more

MarkPさんが書いているように、同時接続ユーザー数制限なしで。   最大16分割です。 ビデオウォール - Cisco Meraki >注：ビデオウォールには最大16の動画をタイル表示できます。 ... View more

You will not receive a warning if you use a SAML account, something to keep in mind.  Yes, they shut your entire account down, even the devices with valid licenses.   ... View more

No - you certainly wouldn't use it on live networks first - you'd set up a test-bed of some kind.   But you'd probably want to do that for API too..? ... View more

Lucky you ... 😉 ... View more

I have DHCP service running on the meraki MX, the path is: AP > IDF Switches > MDF Switch > MX It was already solved, a dummy thing happened, I have two separated infrastructures, one with meraki and one with cisco. Before I installed the meraki ones, I had everything running on the Cisco AP but for mistake I was propagating the same SSID in both infras, one (meraki) had complete path to internet, the other one (cisco) was not connected to internet anymore and as clients were connecting randomly between Cisco and Meraki AP I had some having internet connectivity and other not, I just turn off the necessary SSID in cisco and leave it only in meraki.  Again, it was a dummy thing but I think it is good to share in case anyone else have this issue hahaha ... View more

Maybe this comes quite late, but just for the record, I have just had the same issue. I fixed it simply removing and re-adding the switches to the Network ... View more

Case 08421059 [ref:_00D606uBw._5006Q1sxTIr:ref] We have the same issues as most people here requiring escalation of a ticket (proper support level) Do we need to involve Cisco account management every time we require support from  Meraki? Being used to Cisco TAC support we see there is a long way to go for Meraki unless the focus is to only sell to small/medium business customers. ... View more

Something we ran across that you could try: https://discussions.apple.com/thread/254005176?page=1 ... View more

Facing same problem, is there any solution ? ... View more