Firstly, https://www.youtube.com/watch?v=-d37z6qCGLQ And when you get to the Consumer URL part, you can use : The vision one instead of the normal one
... View more
@Jonathan_Galvez Here are some visual examples of how to calculate the tunnels https://docs.google.com/presentation/d/1S0eX10RrKAWqW229tw7Q2YUUAaNUzskbvM6uYrLQ2zk/edit?usp=sharing
... View more
Thanks @Mloraditch I see the mounting kit part number is C8500L.... So Kudos for @rhbirkelund there! The port quantity seems to somewhat limit it to concentrator mode as routed mode with HA would mean you'd need to use the 10Gb ports for the LAN. Maybe an MX850 is next with more 25/50 ports 😈
... View more
Recently had a customer with Cameras that went offline and several APs went into repeater mode across multiple sites at different times. It was a DHCP starvation issue.
... View more
This refers to the periods referenced in our kb article for AI-Powered Auto RF. In the article are the period durations, for both avoidance and monitor types, for each severity level.
... View more
That was the ticket! The read only admin was not an admin on the SM networks, only on the SD-WAN networks. After adding the appropriate network tags to the admin user, the API call now returns SM networks. Thank you!
... View more
How about DHCP association database. https://documentation.meraki.com/MX/Deployment_Guides/MX_Warm_Spare_-_High_Availability_Pair#DHCP_Synchronization_2
... View more
Hi Ryan, thanks for pointing to the Bluetooth scanning, I will look into this one. do you know or if not, who can clarify if the remaining calls are on the roadmap/backlog of meraki devs? with. regards Yoeri
... View more
@Roey1984 If you claim the order numbers you can assign the devices to a network and assign the licenses to the devices all at once, you would only claim a serial number on it's on if you are replacing hardware i.e. an RMA or you like doing things the long way 😉
... View more
I'll test my template bound network now. I got the Sensor up webhook. I'll see in an hour if I get the down alert. Update - I got an email and webhook for the sensor being down after an hour for my template bound network
... View more
I do not completely understand your point. Why is it another point of failure? You need a routing device without NAT. NAT excemption would achieve this, I think. You can configure a VLAN interface on the LAN side with one address out of the /29 subnet.
... View more
Not sure if you/anyone still need this, but my customer has successfully implemented it (having it notify in just a couple/few seconds after pushing the MT30). I found the following setup guide for you: https://support.singlewire.com/s/article/Trigger-InformaCast-Fusion-Scenarios-from-Meraki-Sensors
... View more
This infuriates me to no end. Constantly claiming that they are 'enterprise' yet no way to test upload speeds on the equipment that costs thousands. Here is a screenshot of me (while at the office) testing my UDM-Pro ($350) at home. Why is this so hard?
... View more
You're correct. Today you would need to provide a computer with a browser so the admins could access dashboard to view Cameras & Sensors.
... View more
If your clients get DHCP from the shop VLAN that means those clients are in the wrong VLAN and just get DHCP from the upstream shop VLAN. Your two VLANs that are terminated on your core switch should not be serviced by the shop DHCP server. So you should check on which VLAN the MAC address of the client is coming from. I'm pretty sure you have a VLAN hop issue in your network due to a native VLAN mismatch or just blending both shop and client VLANs together. You can also use dashboard captures with filter 'port 67 or port 68' to see all the DHCP messages passing to a certain port on the switches.
... View more
@AlexGregoire there is an API endpoints for toggling Camera audio https://developer.cisco.com/meraki/api-v1/update-device-camera-quality-and-retention/ As for getting a MT30 to do it you'd need some middleware that can take in for example a webook sent by the MT30 and then make an API call.
... View more
I'm thinking there will just be a single VLAN/transit network from the MX HA pair to the cores, and all intervlan routing (and likely inter VRF routing) will take place on the cores, followed by static routes on the MX pair to get to all the DC routes.
... View more
Hi @Ilya_Kisel Progress tracking and updates would need to come from Meraki Support. If you haven't already please open a Support case and they can link your issue to the parent issue for tracking & updates. Cheers
... View more