Hello, check this solution: https://apps.meraki.io/en-US/apps/412605/backloop---sponsored-guest-access   you can set multiple options and also define a list of allowed email address ... View more

In your case, try changing to a different firmware, it looks like the unit is not installing the currently selected one and rebooting  ... View more

Using it with MS425, 225 and 120 switches and apart of upgrade not going very well the devices seem to work just fine (no rollback done or so). DHCP relays 802.1x, SecurePort all work correctly, didn't notice any POE issues as some reported. ... View more

I use Visual Syslog Server for Windows (maxbelkov.github.io) [which is free] installed on an on-prem PC/server and does not have any bandwidth restrictions. ... View more

@LNL02360 Yes, when I was newer to the ecosystem they do in-face default that mode, I always double check them after my initial setup before giving clients the passwords to the wifi, you picked a great platform. They have their growing pains but they have great hardware and they working out the software bugs.  ... View more

Have a look at this. ... View more

We have tested various computers and browsers and it appears that there is an issue specifically with the Read-only account when using SAML. However, when we attempted the same operation with the admin account, they were able to initiate and download the packet capture successfully. We have a started a case for it. ... View more

yes, correct! @GreenMan @maybe you‘ve a suggestion how the cabling should look in such a case too? ... View more

Yeah. We replaced the switch with a new Meraki. Same model. The switch cable test runs with no results. ... View more

Ekahau is a solid choice: https://support.ekahau.com/hc/en-us/articles/10750563401755-AP-on-a-Stick-Surveys-why-when-to-use-them- ... View more

I mean @Arthur_23  ... View more

I think the question was more around enterprise MR license and MX advance sec license in the same org, which as far as I'm aware, is completely supported for both co-term and PDL ... View more

Hi, you need to set up the separate system of each unit, like these smart lock have proper battery back ups when anything happen they function properly. You can also visit website for more details related to this where you can find out the more solutions of it. Sometime when you set up smart lock system in multi stories building then they are usually operate through one system and this system maybe divided into floor to floor and then it work properly.  ... View more

Was is the LED on the affected AP's doing.   If you login to the local status page on each device what is it reporting?  ... View more

Hello all, I have the same problem and on acces control page when i select Meraki AP assigned (NAT mode) mode and gave the correct dns the macbook connected and used the internet clearly. ... View more

I think Meraki are dissuading people from buying the MS390... ... View more

>Load balancing is enabled. Traffic shaping rules are default.   You can experiment, could you try turning this off please. ... View more

I personally don't want it but the client likes the idea of redundancy. I am trying to talk them down to what you recommended. Thanks for the reply! ... View more

Many thanks @BrandonS ! I was unaware of the documentation page, very useful. My main concern though is if these features are also supported in mesh mode. I already have a TP-Link wireless mesh at home but now have the need to run one SSID on a single AP while in mesh mode. Meraki-Go looks like a great replacement option but I'd like to get confirmed if my use case is supported or not beofre buying 😕 ... View more

I have used this tool for a long time.  The last time I used it recommended putting in so many APs you couldn't fail, but the cost would have been huge.   Is it better now? ... View more

At my last company, we would have backer boards that were painted with high visibility paint and mounted to the beam.  That way it could be seen easily by anyone running lifts or fork trucks.  We also had large labels printed so we could easily read them from the shop floor. ... View more

I am using the 8 port poe meraki go switch. And yes exactly thats the point of unplugging the device and use wired connection ... View more

So, i wrote to promorenewals@meraki.com and certifications@meraki.com (took the eCMNA last year, as the CMNA is not available in our profile)   Thats sad, but then i will keep my ubiquiti gear in the lab, as it does not need a license (UDM Pro etc.) 😭 ... View more

so gave it a go, as well as turning off a power saving option in driver options - no effect. Annoyingly - On my home network, running on wall power and connected via eth cable no wifi - the jitter is all over the place. I'm just running the test over and over and getting a different result each time. Nothing else is on the network using any bandwidth. I have a 300Mbs fiber circuit.   My best test was 7ms, but most around 50 and some as high as 100. There just isnt anything I can see that is changing between tests yet the values are so far apart! ... View more