Setup SD-Wan_Meraki MX64 on Local Lan

[Tuan_Truong]

Hi Team.

I would like to setup SD-Wan between Meraki Device. There is one device (MX64) on local lan. 

Network Diagram as attachment. 

Please advise, if there is any advise.

Thanks.

[kYutobi]

https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/...

Check this out. Hope it helps.

[cmr]

If you want both LANs to talk to each other then the MX on the left needs to be in concentrator mode.  If this is the case then what you have is a standard setup for datacenter on the left and remote site on the right.  It doesn't have to be that way round but that would be common.

[Tuan_Truong]

Hi CMR.

Thanks for your information. I'll make MX behind Firewall host with Concentrator mode. Will test with your solution.

[Tuan_Truong]

Hi kYutobi.
Thanks for your response.

I'll change the routed mode to Passthrough or VPN Concentrator. And then test again.