Given there is a pattern with the humidity that matches the temp I would say the humidity changes everytime the compressor turns on.  ... View more

Νο, not using vIP (at least while testing).     ... View more

So far I have checked all the below devices on firmwares from 15.37 to 15.40   Z3 64 65 67 84 84 HA pair 100 HA pair 250 HA pair   None populate the CPU graph with any data ☹     ... View more

Thank you Claes_Karlsson. It was firmware issue. After update everything works! ... View more

Hey All! Thanks for all of the feedback. We definitely hear you about SSO -- it's something that is top of mind for us, and we are actively investigating how best to implement to provide the most seamless experience. ... View more

I’ve seen this discussed on Reddit as well, the theory being they are faulty. It seems like tapping/pushing/prying on the mount can make the whine appear or go away, and when it whines it’s in repeater mode. ... View more

That would be an option. But we are talking about a current deployment.   Another workaround I found was using tags on APs along with scheduled availability on the SSID, but still.. not as convenient as a "Disable AP" option.   Time for the wish button I guess. ... View more

Yeah that is annoying how browsers do that.   Many browsers have an option to disable auto-suggest for a URL.  Find that option and enable it for the Meraki shard you are on. ... View more

@pjc26.x will continue to get security and functional fixes, just not new major features.  Hence the support up to 26.99 when we are only on 26.8.1 at the moment.  I think that if you configure a network that has a mix of devices with 27.x then the newer devices will get 27.x and the older ones will get the latest 26.x.  Obviously you cannot use new functional features that rely on 27.x.   We have been doing a bit of rationalising and have been replacing the 802.11ac Wave 1 APs at sites with only a few with Wave 2 APs from sites where most are Wave 1, thereby allowing us to use the new features in the now all Wave 2 sites if required. ... View more

All DNS queries are captured, identified as being from that client on that AP and encrypted.  They are then checked and an unencrypted IP is returned to the client that will either take them to the intended site or a block page.  Step 2 is simply about how the DNS packet is wrapped so the information can be returned. ... View more

We are definitely aware that it does not recommend chaining repeaters and we have tried not having them chained adding the hop was done as a last resort for Repeater 2. Repeater 2 that is about 140m away from the roof AP we just cant get a usable link on which is why we are trying to chain that one to Repeater 1. Granted neither Repeater 2 or 3 have line of sight with our Roof AP. However Repeater 3 (110m away from the roof AP) we have seen a usable stable link back to our Roof AP. Outside of being roughly 30 more meters away then Repeater 3 we were just under the impression we would see somewhat similar results from Repeater 2. Anyway that  is the reasoning for trying to add the hop. The more I post and think about it I get the feeling we are just trying to do something outside the scope of best practice for these MR84's may not be possible.   As a side note we have the Mbps set for our outdoor MR84's between 18 to 54. ... View more

Its just a management/ alerting  setting. You can set it at the switch settings ... View more

That is your uplink ports to the internet. Did you check if a client connected to the switch gets an IP through DHCP and can connect to the internet? ... View more

If you are a Cisco partner you can go through your sales-order team for a trial (that's what we do). ... View more

I'm following closely! We see these gaps also (mainly reported because video streaming is popular at the moment) but Wifi coverage is very flexible at this customer, so no business affected ..   Will love to hear what engineering has to say (and how they will discover what's wrong) .. ... View more

Thanks for the feedback @Brambo I think this just confirms the MR45 and MR55 are still having a continuation of issues since their conception. ... View more

I let the MS's Port learn MAC from the printer, so it did not work, after I set MAC manually it is working. looks like Printer does send ARp because i can see the Printer MAC when i check the details of the port, but MS port Security Can not catch it automatically.     ... View more

I have not used one yet, but according to the install guide, there is no blue led status. https://documentation.meraki.com/MG/MG21%2F%2FMG21E_Installation_Guide Have you gone through the setup progress on the local page? https://documentation.meraki.com/zGeneral_Administration/Tools_and_Troubleshooting/Using_the_Cisco_Meraki_Device_Local_Status_Page#MG_Series Does the MG have a signal? Is it connected? Maybe the SIM has a PIN ? ... View more

Well...thinking about better solutions would be advisable then. 😇 ... View more

Are you using "bridge" mode?   If you use NAT mode (such as for guests) and you roam you loose any existing TCP connections. ... View more

Happy to be part of the community.    ... View more

To be considered compliant with 802.3af or at, the midspan must deliver between 48 and 57 Volts. ... View more

Also check if all your APs were part of the same Meraki order and that this order does not contain equipment that you don't want to add to the dashboard.  Claiming the order itself on the dashboard will add all the APs automatically.  ... View more

Attend an ITU conference and you might be less sanguine about existing WiFi usage. Manufacturers have a lot invested in current technology. They will have to be dragged screaming into the 802.11ad world. There is a lot of uninformed prejudice about what is possible in the ad portion of the spectrum. As a consumer, one has to ask why the manufacturers are still trying to sell us technology that has a poor future. ... View more

As far as I can see, BGP cannot be used for this purpose on Meraki, unless something has changed since this post https://community.meraki.com/t5/Security-SD-WAN/BGP-Configuration-on-MX/td-p/28710     ... View more