Hi @jumbojake , Thanks for your post and apologies for the inconvenience. I was glad to read that you found a work-around (spot-on).   Based on your description, I believe it aligns with an issue we were having which is marked as solved around 2h ago by our development team. Could you kindly: 1) Check if the issue remains? 2) If yes, raise a case with support so we can investigate further? Thank you have a great day ahead of you. ... View more

Hi Jumbojake,   we are having the same issue. We are trying to connect an MV23X camera via Wifi, but it loses the connection all the time after 10-20 mins. I do not understand the accepted solution. Does it mean creating a SSID for the camera and applying it only to the closest AP?   Thanks   Regards  ... View more

Congrats everyone and well done @DanD  ... View more

@jimmyt234 Sometimes we are speedy 🙂 We just want to fit in!! 🙂 ... View more

I am facing the same issue with the Meraki setup where i have ubiquiti wireless bridges connected for point to point and point to multi point link.  We are getting alerts for the UDLD.  There is no option to disable the UDLD on the ports. Only we can choose from ALERT or ENFORCE.  I have set the port to ALERT only as i dont want to shut/block the traffic. Is there any way to get this fixed ? ... View more

UPDATE: this contest has ended! Stay tuned for the final points round up and the announcement of our many winners! ... View more

Are you utilizing Combined Power? I ran into a similar issue, and in my case, it turned out to be a hardware problem with the MS not offering PoE one any ports regardless of configuration. I’d recommend opening a support ticket with Meraki — they were able to confirm the fault and issue an RMA. ... View more

@jumbojake this is not a forum, it is a community built on mutual respect for all the other unpaid members.  If you felt @RWelch was not being helpful, simply ignore his posts and as he mentioned and wait for other ones that you may find useful.  In fact @PhilipDAth has given you the answer so I'd make the change he has suggested. ... View more

Go to this link https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Network_Alerts_and_Notifications/Dashboard_Alerts_-_Device_Health   go the section called Ethernet Uplink Speed Degraded.   If you think there is an issue call support and open a case, you are paying for their support .  Make them tell you why.     ... View more

The main limitation is that their minimum operating speed is 100Mb/s.  No more 10 Mb/s support. ... View more

We don't use Google Chrome in our organization, thanks.  ... View more

How long ago did you try the AppleTV? It used to have a long delay but recent updates have brought that down to circa 3-4 seconds, so may be worth revisiting if that is acceptable? ... View more

Congrats @tysnweiss, @CLR-NetSupport, and @JCalderone!      ... View more