Hi ! I used to deploy Site to Site VPN with Meraki MX devices (non Meraki GO), especially with "IPv4 VPN subnet translation" Does Meraki GO GX50 can handle IPv4 VPN subnet translation ? Thanks ! ... View more

Oooof the MS390.. that thing... I've never seen a device with so many bug fixes. ... View more

10 more days, I am getting very excited. ... View more

Mandatory selfie with @CptnCrnch at the CiscoLive CCIE party   ... View more

Woo, go Lions!! I had them as my top pick in the Super Bowl this year, and really thought 2024 would be the year they finally went the distance.    Welcome to the Community, @ArtMarshall. 😃 ... View more

Well, at least it was Qwerty 🙂 ... View more

When you log in you'll notice the URL starts with something like https://n100.meraki.com/.   The "100" is your shard number.  When a shard ends up with too many customers on it a shard split is sometimes done to reduce the load.  After that you'll have a new shard number. ... View more

It is also spelled out in Meraki's documentation. Yes Meraki is meant to be "simple"(ish) but this is still business-grade networking, and I don't really buy that one extra dot of documentation is making their firmware upgrades unusable, it is just a benefit to certain people and meaningless to others. ... View more

Thanks for joining the community @Cnicnode . ... View more

Welcome!!! ... View more

Yes, agreed. Finally some closure! Thanks, for the follow-up! ... View more

@TyShawn Strange! I'll send you a PM so we can continue to troubleshoot outside this thread. ... View more

Thanks all. I was hoping the vMX would be an edge device. However given it isn't, i have just deployed a NAT gateway and load balancer in my vnet. The vMX is just dealing with routed traffic. What is the logic behind the vMX not being able to be an edge firewall and look after all my traffic?   ... View more

I feel special.. I got the GOATs of the forums responding to this silly ask. Thanks all for your input. I need to get approval from my company to get a couple of long-term testers and get this tuned. Main SSID 1 (including IoT) | WPA2 | Identity PSK without RADIUS | 2.4-20/ 5.0-80 (I tried 40 still the same) | 802.11r Adaptive <-- Disabled now. WiFi6e test SSID 2 | WPA3 | Preshared key | 2.4-20/ 5.0-80 (I tried 40 still the same) | 802.11r Disabled Secondary Testing for PPSK SSID 3 | WPA2 | Identity PSK with RADIUS | 2.4-20/ 5.0-80 (I tried 40 still the same) | 802.11r Disabled Just like @PhilipDAth I have 11r and B/S disabled, but I had that disabled on the secondary SSIDs now that is changed on the main.  @alemabrahao  I'm not sure how I overlooked the bit rate I had that set at 11Mb/s vs 12Mb/s That being said thank you all for responding and I will follow up once my new units come in. As of now, I am back on my MR44's. ... View more

Just popping in as a datapoint on this topic. Meraki is pushing to get more IoT devices into the market.. having this option even with licensing would make it easier to accomplish this. If an admin needs to monitor a room or space apply one of the IoT licences to the AP, or if a space that needs to be monitored that doesn't have an AP then install a standalone unit. ... View more

I may have found out something about the 1:1 NAT.  Apparently the 1:1 NAT will not even try to work if the destination is not in the ARP table of the Meraki.  And, in my case the destination device didn't seem to fill the ARP table in my short testing window.  After trying another destination device, it started working about 24 hours where it did not initially upon setup.  Very strange it takes so long to update the ARP table. ... View more

  So working with AWS when I had the VPC peering in place the routes were good tcpdump showed the traffic hitting the VM and the VM sending the traffic back. What was noticed is the next hop was not identifying the VMX as the next hop causing the packets to drop. The fix for me was to place transit gateway in place and then configure the routes in the TG/ each VPC / and the vMX. As on this moment I have traffic processing through the vMX to my VM.    ... View more

is this solved by now? or with the FW 18.2?     ... View more

Congrats to everybody for their contribution! ... View more

I just ran across this post... It's been a few years and I wanted to see how things are going with your network?  ... View more

Please let us know what you find. ... View more

Good luck!!! You might want to have an extra cup of that tea or coffee.. ... View more