Congratulations to the winner 😆 ... View more

I just ran across this update. Has anyone got this working with a per device MAC authentication and VLAN assignment, like the Freeradius setup? ... View more

Thanks so much again everyone! Be sure to check out our other Wireless Fundamental Implementation courses on the learning hub about Deploying, Building, and Securing (coming soon!) your wireless networks.  ... View more

Just to close the loop with the community I spoke with @Brennan_Martin offline so we could clearly workout what each of us was attempting to say. At this point we are on the same page and I want to thank him for the time he spent with me today. ... View more

Does anyone have any update on this? ... View more

hello @RacconusRod    Meraki Go hardware can run with other hardware. The only thing you can NOT do is manage other hardware with the Meraki Go app.   In case you get the CBS350 you'll have to use Cisco Business mobile app to manage the switch and the Meraki Go app to manage the Meraki Go hardware.   hope this helps   Cheers ... View more

I hope this helps:   Definitions • End-of-Sales Announcement (this document): Date of official end-of-sales notice, typically six months prior to the last order date. • End-of-Sales Date (EOS): The last date to order the product through Cisco Meraki point-of-sales outlets. After this date, the product is no longer for sale via any channel. • End-of-Support Date (EOST): The last date a product will be affirmatively supported by Cisco Meraki, typically two (2) years following the EOS Date. End-of-Sale Milestones • End-of-Sales Announcement: February 24, 2023 • End-of-Sales Date: June 1, 2023 • End-of-Support Date: August 24, 2025 ... View more

I recall seeing those Viking units when we integrated with overhead paging systems. Solid work sir!! ... View more

The short answer is no. M-Go was designed to be a single security appliance per network, and the subscriptions would apply to a single unit on that network. If you want a different way to look at your design then you could create your network A with all the VLANs as it is today, then create your VLANs for network be and block them from the VLANs from network A. Lastly, you will go to network B and create your VLANS and SSIDs on network B. This could also reduce the need for ISP B. But I am assuming a lot in this option.    Your other option is to purchase a second subscription, and prepare to migrate from your GX20 at some point as it is on the EOL/EOS list. ... View more

I had this issue on a Meraki propper switch. I ended up rebooting my switch which resolved the issue. Some things to try is verify your switches IP, subnet mask, gateway, and DNS servers if you have custom settings. Also, try a reboot, and lastly a factory reset.  ... View more

@TRHH  our sincere apologies for the inconvenience caused by the lack of switches. Please rest assured that this is at the forefront for our teams, who are working as quickly as we can on Meraki Go switch replacements.    As a stop gap while we work on making new switches available - again, if you simply need an unmanaged switch, we'd recommend looking into the Cisco Business 110 series unmanaged switches (5 to 24 ports with PoE models): https://www.cisco.com/c/en/us/products/switches/business-110-series-unmanaged-switches/index.html    While you won't be able to manage the CBS switches in Meraki Go, you'll still be able to connect it with your Meraki Go networks.    We'll share more news and announcements around the complete Meraki Go platform as soon as we're able. We very much appreciate your patience!  ... View more

@MiriamK said they will at some point, but no details as of yet.  ... View more

Yes you can, I had to order a small business 8-port PoE "dumb switch" with 4-PoE ports, but they have larger managed switches that are affordable. This is an example,   https://www.amazon.com/Business-CBS250-8P-Limited-Lifetime-Protection/dp/B08KSY3XNN/ref=sr_1_4?crid=3ADQ2IHKYWQCH&keywords=cisco+business+switch&qid=1691075169&sprefix=cisco+busisness+%2Caps%2C120&sr=8-4 ... View more

I like it!! Any thoughts on moving to a MX75 for your MX84? Currently I am running a MX67 at the edge, but I am about to move to an FMC/FTD for learning.for my core switch I have a Cisco WS-C3850-12X48U. ... View more

I'm glad to see this class be added for the customer base. ... View more

I did notice one strange thing when starting a ticket. Once a user/admin clicks open ticket then enters anything in the subject field. There is a spinning wheel in the box below that never goes away. It is like the box is looking for a ticket or KB that it never finds.   ... View more

This issue is resolved with the latest update. ... View more

The L3 switch has the following limitations. No L7 rules. Limited L3 rule count No object-based rules. ... View more

That choice is up to you and what is best for your customer base. I will say I came from UI, and though in many cases it is a good choice I can't name how many times I was hit with some random bug that took my customers down. There are other brands out on the market that fall in the same price point, but it comes down to what you feel is a good band choice and the learning curve behind that choice. ... View more

Thanks TyShawn...will be doing all via M-Go portal.  If I just add the GX50 to M-Go, can I just put in in place of the MX65, and the existing GR10 WAPs will still work?  Or is it best I remove them from the M-Go and re-add after the GX50 is up and running? ... View more