Hello, I am facing an issue, kindly need your insights over here. First my topology is connected as ISP router to Meraki router(MX67C) internet port. Meraki router port 3 to Meraki switch(MS120-24P) port 1. Meraki switch port 2 to Access point (MR33). Port 3,4,5 are trunk ports which is configured at template level. Currently 14 devices are connected to the network, 8 devices are connected through Wi-Fi (SSIDs). From Meraki dashboard I did not observed any issue with respect to internet. Able to ping Google DNS, able to ping all 14 devices from my end. I observed all 14 devices are receiving proper IP from respective VLAN, there is traffic flow and devices are consuming data. But physically no device is able to access internet. Troubleshooting steps performed 1. Re-started the devices laptop, iPads 2. Disconnected port 2 cable of Meraki switch and connected back. 3. Rebooted Meraki switch and Meraki router 4. Reset networks settings on both iPad and laptop Still issue persist. Next steps which I thought 1. Checking by changing the access point cable to other port of switch. Please guide what can be the cause of this issue and what can be the resolution
... View more
