Hey @GIdenJoe  The MS family datasheet specifies the different "routing capabilities" that each model has and mentions the DHCP relay for said models. Other models add static routes, DHCP server capabilities, dynamic routing, or VRRP. https://meraki.cisco.com/product-collateral/ms-family-datasheet/?file ... View more

Hey @PhilipDAth    To close the loop here, I have updated the KB with screenshots of the different states/errors to make it more clear when it has kicked in. ... View more

Olá @Luana ,   Apenas para referência, estou usando o Google Translate. Para usar o Failover WAN 2 não é necessária nenhuma configuração ou configuração extra. Simplesmente conectando a outra WAN à WAN 2, o Meraki executará um failover se não detectar nenhuma conectividade na WAN 1 por 5 minutos, ou fará um failover instantaneamente se o link físico cair. Você pode reduzir essa reinicialização suave de 5 minutos para 1 minuto ligando para o suporte ... View more

Hi！@KH  Thank you so much!! ... View more

Which of these options have you selected on both networks?   ... View more

This is where computer authentication comes in. Only accept the certs that have been distributed by your internal CA. ... View more

[...] it seems like you are mainly focused on events.   Correct. I.e. don't need "visual" or "simple to use" but rather - a splunk-like QL for Meraki events that is simple to set up and maintain and ideally wouldn't require me to set up some sort of a forwarder (like a syslog server).   (E.g. all that Datadog seems to need to start receiving logs into their system is an API key. That's already much better than setting up a syslog server.)   In other words, the main question remains:   What is the simplest way to use a decent Query Language for Meraki events?   Perhaps it's Logic Monitor or Datadog or New Relic - or Splunk, all of which have integrations. But which one, in terms of QL maturity and overall value?   (Ideally the answer would come come from someone who has tried a few and zeroed in on something that worked.)   Thanks again! ... View more

Hello everyone, we did a factory reset on the MX75 and the port internet3, WAN2 is now active. Thank you all for your time. ... View more

Something like this is probably best troubleshot on a call with Meraki support as they can assist checking different bits of configuration within your network and pulling captures during testing. ... View more

The packet counter on the interface aren't incrementing so there's nothing happening on the port. A packet capture is empty.  It's behaving in the same way a port would if connected to a media converter with link fault pass through set to off. That is, active connection to the media converter, but no connection beyond . ... View more

WiFi...we had an issue a week or so ago with someone putting skimmers on 2 of our ATM machines. We are trying to see if we can get the individuals phone info like MAC address as evidence that they were there at that time. ... View more

I did yes, whats werid is it also does not show on my laptop as a profile to install.   Thanks ... View more

Hi @Gary_Geihsler1 , seen on both even if I am using Traffic steering for the IPs seen in the pcap during a WhatsApp call ... View more

Hey @PhilipDAth  Thanks for the reply. It is clear that I am not going to get a simple solution. From what I have been looking at, the SD-Wan Plus license is not a requirement, only for exclusions based on applications. Likewise, taking this path would imply making a design change to the Networking architecture and we have to evaluate that with more time. The other alternatives would have to be seen together with our cybersecurity team, since we are using Umbrella (Roaming-Client). Ultimately, I understand that there is no current capacity in the Mx devices that can solve this problem. Thanks! ... View more

Hola Antonio, Sólo como aviso, estoy usando una traducción ya que no hablo español. Dicho esto, esto se puede configurar mediante la función "asignar política de grupo por tipo de dispositivo". Se puede configurar en su red aquí: https://documentation.meraki.com/MR/Group_Policies_and_Block_Lists/Applying_Policies_by_Device_Type Esto debería permitirle permitir solo Android, por ejemplo. Espero que esto ayude, avíseme si tiene más preguntas.   ... View more

Hey @Klingherit    Practically everything other than the actual enabling of WPN setting is currently supported. The following API can be used to create the Group Policies: https://developer.cisco.com/meraki/api-v1/create-network-group-policy/   Afterwards the following API to create an IPSK SSID for example: https://developer.cisco.com/meraki/api-v1/update-network-wireless-ssid/   Afterwards you can also create IPSKs with API: https://developer.cisco.com/meraki/api-v1/create-network-wireless-ssid-identity-psk/   Then creating the port profiles: https://developer.cisco.com/meraki/api-v1/create-network-wireless-ethernet-ports-profile/   Then assigning those port profiles to an MR30H/36H for example: https://developer.cisco.com/meraki/api-v1/assign-network-wireless-ethernet-ports-profiles/   Finally you can check the IPSK/Port profile configuration: https://developer.cisco.com/meraki/api-v1/get-network-wireless-ssid-identity-psks/ https://developer.cisco.com/meraki/api-v1/get-network-wireless-ethernet-ports-profiles/   I would recommend putting in a feature request by clicking the "Give your feedback" button on the dashboard or with speaking to your account team. It shouldn't be too hard to argue for such a feature.   Hopefully this helps!         ... View more

Yes that's what I meant, any ssid in that network that even is disabled but has wep just needs to be changed before anything will save. ... View more

Hi @KH    That worked!   Why did the nested loop work instead of what I had? Also the goodput field, is that the throughput/bandwidth on the uplink?   Thanks! ... View more

That is going to require the API, a script, and a program scheduler.  You would schedule a script to run and change the applied group policy. ... View more

Hello @Ashandil    There is currently no way to automatically alert a user to them being out of compliance. However, you as an administrator are able to view the non-compliant list and then use the send notification button on the dashboard to write a message to the device in question mentioning that they are out of compliance.      Hopefully this helps and let me know if you have any more questions.   ... View more

Thank you everyone for the responses! I think I got this one figured out. ... View more