Hello. I'm looking for a little help with my home lab. I just want to have a very basic setup with two segments with static routes between them. New to me, but likely very elementary to you, so thanks in advance.
I have a z1 with my main network and it is connected to my ISP. 192.168.1.0/24:
![pcrequest_0-1656020381318.png pcrequest_0-1656020381318.png](https://community.meraki.com/t5/image/serverpage/image-id/24266i21E728CA4AD80D6E/image-size/medium?v=v2&px=400)
I have a z3's Internet port connected to one of the z1's LAN ports. I have a different network 192.168.2.0/24 and a static route defined:
![pcrequest_1-1656020481549.png pcrequest_1-1656020481549.png](https://community.meraki.com/t5/image/serverpage/image-id/24267i34ABA8650969D355/image-size/medium?v=v2&px=400)
I want both segments to route to each other. I.e. I have a PVR on one segment, but I can't play its content on the other.
Tracert from the first segment to second:
C:\zzz>tracert 192.168.2.44
Tracing route to 192.168.2.44 over a maximum of 30 hops
1 <1 ms <1 ms <1 ms 192.168.2.44
And I can ping any possible address from 192.168.1.0 but no clients actually exist with that address:
>ping 192.168.2.33
Pinging 192.168.2.33 with 32 bytes of data:
Reply from 192.168.2.33: bytes=32 time<1ms TTL=64
Reply from 192.168.2.33: bytes=32 time<1ms TTL=64
Reply from 192.168.2.33: bytes=32 time<1ms TTL=64
Reply from 192.168.2.33: bytes=32 time=1ms TTL=64