I have been using XCA since Version 1.4.x, I just recently installed 2.5.0 and want to move the CA to my new Win 11 computer. I believe if I export from my old machine the crt file into my new XCA then the database will follow. It that correct?     With my new XCA all the operation button for each tab are greyed out and not operative. I unblock the file before and verified the checksum so I am quite sure it was a complete install.    Do you have any suggestions?  ... View more

Same issue here. Did you ever figure this out? The other option (Anyconnect) works fine but that is not option for us. ... View more

Hi @dbarr_pxo, thank you for sharing this feedback with us. I'll pass your comment along to our documentation team. They may follow up with you here if they have additional questions for you!   ... View more

Just bought 28 of them for a new office floor. ... View more

Hi Phil, did you ever implement this (vMX in Azure, then s2s to your DC firewalls)? ... View more

For documentation purposes, this describes each switch port color and icon including the black port with or without the bolt.   https://documentation.meraki.com/MS/Monitoring_and_Reporting/Switch_Port_View   ... View more

What are the Models of Outdoor Antennas? MA-ANT-20 Meraki 4dBi/7dBi Dual-Band Omni Antennas, set of 2 MA-ANT-21 Meraki 5 GHz MIMO 13 dBi Sector Antenna MA-ANT-23 Meraki 2.4 GHz MIMO 11dBi Sector Antenna MA-ANT-25 Meraki Dual-Band 8dBi/6.5dBi Patch Antenna, set of 2 (if using with 4x4:4 APs) MA-ANT-27 Meraki Dual-Band 9dBi/12dBi Sector Antenna, set of 2 (if using with 4x4:4 APs) AIR-ANT2513P4M-N Cisco Aironet Four-Port Dual-Band Polarization-Diverse Array Antenna (Stadiums)   https://documentation.meraki.com/MR/Other_Topics/Frequently_Asked_Questions_regarding_Cisco_Meraki_Antennas     ... View more

What are the specs for the new GX50? Need more details with this new hardware device… ... View more

Updating post here as we now support up to 32 sensors per MV and MR if you are latest GA versions of code for MV/MR. ... View more

What chipset does the MR57 use?   ... View more

I wanted to post to explain some of this behavior and what steps users may take in the future when running into this problem.   First, all Meraki hardware is designed to work out-of-band. This means that if the app is showing things as offline, it might just be the connection between the hardware and the Cisco Meraki cloud. In these states, the hardware will continue operating per the last configuration it received from the app.   Second, if these issues persist past logging out and back in, it definitely merits a support case. We expect this information to be readily available, or at least available by using the pull to refresh - pulling down on many screens should prompt a data refresh. ... View more

We are waiting for it more than 1 year. Reboot and firmware update is not working. ... View more

I guess they've dropped it because of its implications (performance impact as well as functionality issues) in favor of Umbrella. At least that'd make perfect sense. ... View more

@Kaman  use sign up web form given above. https://merakiresources.cisco.com/merakigo-beta?_ga=2.176768677.1243555177.1635857259-1612282553.1635763881 ... View more

Well there is no upstream firewall. And if there was, should the Meraki dashboard then not tell me that there is something missing. Its just strange. ... View more

Hello,   as the new firmware is in Beta and doesn't support some features like multicast over LAN, Could you please tell me, how long does it take to get a productive version of MX16.x Firmware? We need to run anyconnect on our devices but as long as the firmware Beta version is, we can not use it in the production world.   Best Regards!       ... View more

Google is finally supporting Samsung devices through Android Zero Touch. In this case go away from Knox Mobile Enrollment and set up with Android Zero Touch.   https://documentation.meraki.com/SM/Device_Enrollment/Android_Zero-Touch_Enrollment   I don't think Meraki will put any more effort in this, because you can set up the whole Android Enrollment through Android Zero Touch regardless the manufacturer   I tried different ways with KME and SM, but I keep stucking on the Enrollment Code. It wants me every time to put it in manually.   Best regards ... View more

Hi,   I have a strange issue with a Z3C that was working with EE a couple of weeks ago and now isn't.   I've tried the following:   Tested SIM, works fine in a phone. Tried another Z3C, same issue. Tried another know working SIM, same issue.   I can see you are in a safe mode and able to enter settings relating to the cellular connection (as shown above in the post by @ConnorL ).  On the Z3C there doesn't appear to be an option to configure this when on the local status page?  Am I missing something with going into "safe mode" as shown on the screen shot?   I've logged a support case, just would like to try what has been suggested here but can't same to be able to get to enter the settings as shown.    Firmware version: MX 15.42 ... View more

Hello Delfuego,   Unfortunately we do not offer an extended warranty service for Meraki Go. Meraki are committed to and continue to invest in Meraki Go. You can see evidence of this in the version history of our app, where we've released a new version every 2 weeks since launch.    Lee   ... View more

It was not clear at all that I could proceed without using a Meraki AP.  Thank you for clarifying, I will look at the app more to bypass this so I can create a network.  ... View more

https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/Approximating_Maximum_Clients_per_Access_Point  ... View more

I've created 3 new administrators in my organization, and all 3 are getting this same message.  They clicked on the link in the email from Meraki to setup their account.  After they changed their password, all 3 received this message.    I opened a case with Meraki, but haven't heard from them yet.  Wanted to see if anyone else got the same message.    BTW, I have no issues signing into this organization, just the 3 new users I created. ... View more

> if you try to process an RMA, that’s the only address Meraki will be willing to ship to.    It's correct, that the licence and support and tried to the original owner.   I've rarely had Meraki support enforce this.  They normally ask for the shipping address, and just ship replacements.  If you get the odd support person enforcing the letter of the law - close the case and open a new one. ... View more

Hi, everyone, The cause is not known, but after the update of iOS 14.1, the stability of the connection between the GR10 and the iPhone is significantly improved and the problem seems to be solved. ... View more

Upgraded plenty of MS120 and MS220/210/225 switches now and all gone well so far, even a L3 stack.   One odd thing I noticed over the last few upgrades; MS120 switches upgrade about 10 minutes after requesting, whereas MS220/210/225 switches upgrade about 35 minutes after requesting... ... View more