Hey Shadius,   As others have mentioned, there isn't a way to download configs from your devices. I'm not sure what the end goal is, but you can 'save' a switch config by making use of templates/switch profiles. Check out the following doc for more info - https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/Best_Practice_Design_-_MS_Switching/Templates_for_Switching_Best_Practices#Switch_Profiles ... View more

Hi Craig,   Although not explicitly mentioned, I believe that the wireless/SSID endpoints function for the MX wireless series as well. ... View more

Hello!   Our client VPN troubleshooting doc goes over some potential causes for the 789 error you're seeing - https://documentation.meraki.com/MX/Client_VPN/Troubleshooting_Client_VPN#Windows_Error_789 ... View more

As mentioned, I wouldn't worry about it. If you want to be absolutely certain that there isn't another DHCP server on your LAN, run a PCAP on the LAN port and look for any DHCP activity (filter is 'bootp') ... View more

Do you have any type of monitoring on the switch/uplinks? I'm thinking the APs briefly lose upstream connection, and switch to mesh. A power cycle will then be required to force it back to GW mode. Also, is your firmware up to date? ... View more

Also make sure that your SSID is not isolating clients. ... View more

Do you know if there is a client cap in the AP software? ... View more

Yes, all of the APs will need to have BLE support. That info should be in the APs datasheet. ... View more

You can pre-configure the switch without it being plugged in via the dashboard. Once configured, you should be able to plug it into your LAN and have it connect to the dashboard. ... View more

As others have mentioned, there is no way to see the raw uptime in the dashboard. Please drop this in the 'make a wish' box. If you really need the data, you can likely check with support. ... View more

I don't believe MV cameras support that functionality. I know this isn't very helpful, but drop it in the 'make a wish' box in your dashboard. ... View more

You should be able to use any RFID tags for basic BLE tracking. ... View more

I get what you're trying to do, but not sure if I would rely on the dashboard URLs to be consistent. ... View more