We had horrible problems with the 730L - sporadic drops, sometimes for hours at a time, that we would not have with older Pantech USBs, etc.  Once the 730L became Verizons main modem, that was a drag.  We just couldn't use them, and now search Amazon and the like for ancient, overpriced Pantechs....because they work!  I opened cases with meraki support on this but they were stumped.  We are going to bring in some Feeneys to test out, but they of course are quite a bit more expensive, so some of our remote sites are not liking it.  Not to mention how much more expensive the Z3C Merakis are with built in cell. ... View more

I just re-read your initial post, to be honest I wouldn't expect to be able to do anything like streaming or downloading large files with a 2Mbps connection. Really you are just going to be limited to web browsing and emails.     ... View more

Hi Spence Have you solved your issue? You can do this by removing NAT on the interface. ... View more

I have this same issue but have messed with the night mode settings and even disabled night mode and still getting black and white during the day. the camera is a MV21 with Firmware 3.30 ... View more

@ewwhite The 26.2 release fixed quite a few of the issues we were seeing. Apple has also said there was an issue in previous versions of iOS which is supposed to be corrected in iOS 13, so we'll see what happens.  ... View more

Hi, I am logged in remotely and I cannot zoom in / out on any camera using my mouse. Does this feature require someone to be logged in from within the same network / subnet as the cameras are?   Can someone who has only been granted monitoring authorization do zoom in / out on a live view of the cameras?   Thanks ... View more

The interference will only be an issue if the two APs are using the same channels.  If you keep your APs using auto-RF or ensure that each AP is using a different channel, you shouldn't see an issue with interference.  2.4GHz obviously is a problem child because it only has 3 channels to use.  5GHz has many more, so the chances of cross-channel interference is lower. ... View more

If you're looking to monitor the layer 1 status (physical up/down), you can use solarwinds via SNMP (this page may provide more info: https://thwack.solarwinds.com/thread/69928.  Some other monitoring system would be similar.   Otherwise, if you're needing more info about the actual status, you'll probably need to take advantage of the API.   We had to write a script (github link) to hit the API to see if the uplinks were "failed" or "not connected."  That script then sends a list of locations that have uplinks that are down/failed. ... View more

Hi Richard,   the "default" traffic shaping rules were not there before, therefore we had to create them manually.   Cheers, Ben ... View more

Our company now has over a year of experience using these EnableIT PoE injectors in an extremely harsh environments and they have performed flawlessly.  We highly recommend them. ... View more

Hi @LegoGeek    Did you ever get a solution to your issue?   Cheers, M ... View more

I found a couple of links to identify the public subnets but there are two many.   You can download the list of subnets from here . https://www.microsoft.com/en-us/download/details.aspx?id=53602   And these people were trying to identify the actual subnets that belong to the windows updates.   https://social.technet.microsoft.com/Forums/windows/en-US/b596aa81-2775-496c-b159-dcfc5c5bf22d/windows-update-ip-addresses-range-and-subnet-mask-for-windows-server-2008?forum=winserversecurity   So I'm thinking these are the subnets for the window updates. 65.52.0.0/14 70.37.0.0/17 70.37.128.0/18 94.245.64.0/18 111.221.16.0/20 111.221.64.0/18 132.245.0.0/16   157.54.0.0/15 157.56.0.0/14 157.60.0.0/16 207.46.0.0/16 207.68.128.0/18 213.199.128.0/18 ... View more

Is this the 1st api call you have utilised?   it might be worth using postman for a simple GET response   https://api.meraki.com/api/v0/organizations   Is the org you are trying to add the ssid to listed on this GET if yes move down to networks of the org https://api.meraki.com/api/v0/organizations/{organizationId}/networks   I've always found working at the top level then working down to be the best way to find out where the problem is in scripts. ... View more

Excellent, let's start to learn more !!! ... View more

Make sure the ports are enabled.    On my MX65, the ports supply two MR33 without issue.  It is my understanding that the ports are dynamically powered.  If they don't sense a power draw, they will not supply power.   ... View more

The MX is the Security - SD WAN product. While the Z range is the teleworker / remote gateway device.   You can see the specs and difference here ... View more

I have been rebooting the MX after 20mins, MX then connects to dashboard.  We have two WAN connections and it is taking a while. I don't think it is ideal to reboot but have subscribed to this community for future updates.   ... View more

I'd like to take advantage of the integration as we are an existing Umbrella customer. I'm leery of running beta firmware on our MR's. What problems, if any, have customers experienced with the beta firmware? This thread seems rather old yet the firmware is still in beta. When will it be generally available?   Thanks ... View more

Hey all, well the switchover went fine! We have been running on it for a little while now. I just had to watch out for what Adam mentioned in his comment. I reconfigured the local ports on the MX84 to allow the same vlans that I had on the mx64, then all was good. By default they allow everything anyway, so initially connecting wasn't a problem. ... View more

I would agree that would be an option.  In this case is was not identified as a need.  The ISP and bandwidth that they have is not what I would consider worthy of hosting anything, so a policy was put it place that any tenants that required inbound access beyond VPN would need to obtain that service on their own. ... View more

how? example? ... View more

Was firewall ... View more

You can also now find relevant info about our training programs in the Learning Hub! ... View more

We've now got some additional resources available in the Learning Hub! ... View more