Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About BradM
Community Record
8
Posts
1
Kudos
0
Solutions
Badges
Aug 24 2018
2:43 PM
Is it good idea to use VLAN tagging on the Internet ports? I am using VLANS on my LAN connections, but should I enable vlan tagging on my MX65? Would it be useful considering I'm using the MX65 for site-to-site to 2 other locations which are also using MX65's and have vlans configured for those LANs as well?
... View more
Aug 17 2018
11:57 AM
Okay, that is the same place. Thank you so much for all your help. Not all heroes wear capes =D
... View more
Aug 17 2018
11:39 AM
You mean this part that you find under the monitor tab called "Switches"? Where it say's VLAN, I would just put my data vlan there? i.e vlan 5 for data
... View more
Aug 17 2018
11:27 AM
1 Kudo
The phones we are using are Cisco IP phones with a switch/PC port on the back, so I will do what you suggested. Thank you, Brad
... View more
Aug 17 2018
11:25 AM
Live and learn I guess. This is my first time upgrading a network, but at least I know for next time. I appreciate the help though on making this more clear now. Going to deploy these tomorrow, so I feel more confident now. Thanks, Brad
... View more
Aug 17 2018
10:58 AM
I already got the MS250 switch. Because right now I'm replacing the ASA 5512 with the MX65, and I'm replacing two Dell layer 3 24 port switches with one MS250 48 port switch. Just curious if I was going to need a layer 2 switch. So, if I'm understanding you correctly I should just set up the VLANs on the MX, and then just don't create any layer 3 interfaces on the MS250 and use it strictly as a layer 2 switch? From there I just set up a trunk port from like LAN port 3 on the MX to port 1 on the MS250 and then use the remaining ports on the MS250 as access ports for my data and voice? Kind of thinking I shouldn't have even gotten the MS250 now, ugh!
... View more
Aug 17 2018
9:17 AM
Just curious if I will need a layer 2 switch for my companies network. Right now I'm going to go with a MX65 for my edge device, then use the MS250-48P (Layer 3 switch). Now I want to have two (2) VLANS. Let's say VLAN 1 for data and VLAN 10 for voice. Would I require a layer 2 switch as well to implement this type of network? Or could I just have port 1 on the MS250 set as a trunk going towards the MX65, and then say have ports 2-10 set as access ports and set the VLAN to 1 and the voice VLAN to 10? Under the "Routing and DHCP" tab, if I just configured two interfaces, one as the 172.16.8.0/24 subnet (data) and another interface as 172.16.9.0 subnet (voice), and have my MX65 act as the DHCP server for voice. I wouldn't need the MX65 to act as a DHCP server for the data VLAN as I already have one set up on windows server for that.
... View more
© 2024 Cisco Systems, Inc.
