And again another project to get rich of the lacking IT workforce in the todays world. Also the customers needs a full remote managed and monitored network solution.   The classic Catalyst solutions are still rocksolid but the lack the monitoring and easability in the daily doing. Meraki is still not as powerfull as the Catalyst solution, but this is not a fair comparison.   The challenge we met was to re engineer the current network at all (admin is gone) and make a playbook to smooth migrate from the old to the new world. So we need to install the new gear in parallel. The MRs are still a to do because of missing inhouse cabling.   We used 2x MS225-48 / 7x MS210-48LP (4 stacked), 18x MR44 and 1xMT/MT20. Because the MX lacks some features we used a Sophos XGS instead of MX.   Work is still under progress, if you want to see more pictures let me know.     ... View more

And here's another smaller project, replacing Cisco Catalyst 2960S/X and Cisco 2802E with Meraki. In addition, a few sensors and a camera were installed. The migration to Meraki was so relaxed, it's crazy. Since everything could be built in parallel, the only thing that was really work was patching the ports.   Here is the MS225-48LP, primary for VoIP devices and APs. You may also see the old 2960S and some other old stuff^^.     And here is a MS125-48LP for lab use, nothing special.    ... View more

Hi, just swapped an old HP switch for two MS125-LP. Finally insight into the network, fast rollout of VLANs and rapid response to faults.    In the lower part you can still see an MS120-8FP, this is where everything started for this customer. Meraki is addictive 🙂   An older hp switch is still doing its job, who knows how long...   ... View more