Best Practice for Meraki Wireless Bridges

dromios
Getting noticed

Best Practice for Meraki Wireless Bridges

Hello Everyone!  We have a customer who is looking to implement two wireless bridges from the main building (largest) to the two buildings with the oval rings.  At the main building, the APs can be mounted anywhere.  We have used the MR70s in the past, and were trying to discern whether or not we could get accomplish this with 3 MR70 devices given the location of all buildings.  We were also looking at the MR76 devices, but based on the description of the device it sounds like we would need 4 of those, or at least two at the main building and possibly two MR70s at the satellite buildings.  We are also looking at general coverage in the parking lot area, so are also looking at 4 MR70s.  The distance from the edge of the building to the satellite buildings are a few hundred feet.  We currently have two MR70 devices at another location working fine 2000 feet apart, but it is completely unobstructed.  I was looking for some insight from an engineer on this setup, and the ideal configuration.  It would be greatly appreciated.

 

 

Primary Picture.png

 

 

0 Replies 0
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels