Automatic Guest VLAN

Twiles
Here to help

Automatic Guest VLAN

Hello,

I am looking for a way to automatically direct devices that are not domain joined to a guest VLAN (except for a few devices that cannot be domain joined).   

Thanks

1 REPLY 1
PhilipDAth
Kind of a big deal
Kind of a big deal

802.1x can do this.

https://documentation.meraki.com/MS/Access_Control/MS_Switch_Access_Policies_(802.1X)

 

"When an 802.1x access policy is enabled on a switchport, a client that connects to that switchport will be prompted to provide their domain credentials. If the RADIUS server accepts these credentials as valid, their device will be granted access to the network and get an IP configuration. If no authentication is attempted, they will be put on a "guest" VLAN, if one is defined."

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels