Hi @BlakeRichardson , did you find a solution for the mobile use case? I have the same requirement 🙂 I would like to use it in mobile Vans.  Thanks Steffen ... View more

These are 2 Racks recently done bij me, april 2024, i used Unifi slim Patchcables CAT6: Before P1 After P1 Before P2 After P2 ... View more

I wrote this using the Meraki PowerShell Module. It doesn't reset them 100% but it is very close.  Note: This will reset all SSIDs for the entire organization use with caution. PowerShell Module  # Reset All SSID to Unconfigured v1.9 Import-Module Meraki $AuthToken = "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" $OrganizationID = "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" $SiteNames = Get-MerakiOrganizationDevices -AuthToken $AuthToken -OrganizationID $OrganizationID | Where-Object {$_.Model -like "*MX*"} | Select-Object Name,NetworkID $SiteNumber = 0 ForEach ($NetworkID in $SiteNames.NetworkID) { $SiteNumber = $SiteNumber + 1 Write-Host $SiteNames.Name[$SiteNumber] ForEach($Count in 0..14){ $SSIDName = "Unconfigured SSID "+$Count $SSIDConfig = [PSCustomObject]@{ name=$SSIDName enabled="true" authMode="Open" ipAssignmentMode="NAT mode" mandatoryDhcpEnabled="False" splashPage="none" perClientBandwidthLimitUp="0" perClientBandwidthLimitDown="0" perSsidBandwidthLimitUp="0" perSsidBandwidthLimitDown="0" } $SSIDConfig = $SSIDConfig | ConvertTo-Json -Compress Set-MerakiNetworkWirelessSSID -AuthToken $AuthToken -NetworkId $NetworkId -SSIDNumber $Count -SSIDConfig $SSIDConfig $trafficShapingRules = [PSCustomObject]@{ trafficShapingEnabled=$false defaultRulesEnabled=$false } $trafficShapingRules = $trafficShapingRules | ConvertTo-Json -Compress Set-MerakiNetworkWirelessSsidTrafficShapingRules -AuthToken $AuthToken -NetworkId $NetworkId -SSIDNumber $Count -trafficShapingRules $trafficShapingRules $L3FirewallRules = [PSCustomObject]@{ allowLanAccess = "true" } $L3FirewallRules = $L3FirewallRules | ConvertTo-Json -Compress Set-MerakiNetworkWirelessSSIDFirewallL3FirewallRules -AuthToken $AuthToken -NetworkId $NetworkId -SSIDNumber $Count -L3FirewallRule $L3FirewallRules } ForEach($Count in 0..14){ $SSIDName = "Unconfigured SSID "+$Count $SSIDConfig = [PSCustomObject]@{ enabled="false" } $SSIDConfig = $SSIDConfig | ConvertTo-Json -Compress Set-MerakiNetworkWirelessSSID -AuthToken $AuthToken -NetworkId $NetworkId -SSIDNumber $Count -SSIDConfig $SSIDConfig } }     ... View more

We had Meraki for 3 years and switched to FortiNet, and we still have home offices on Meraki. There is a learning curve as those things are 10x more capable and feature rich, but also more complex. They do have cloud mnagement as well, but if a device comes with gig ports, it's pushing  gig. I've been pushing ~300  clients through 2x 1gig uplinks with a FortiGate 60F (~$1000) without any problems. ... View more

It's clearly a typo for the word "deprecated." ... View more

Technically you are not supposed to point to outside NTP servers as a matter of Security. It should stay within the Org. https://www.nwtime.org/news/running-own-ntp-servers/   ... View more

Each of them brings a unique perspective and sound to the theme of "clouds" in music. Music has a wonderful way of capturing different emotions and stories. ... View more

I posted this in another thread, but I am going to add my two cents here as well.   For anyone dealing with this issue, Meraki and Umbrella were unable to provide a complete solution, due to whatsapp heavy integration with Facebook.  Umbrella and Meraki can block the web and desktop app, but the mobile app continued to work.  I had to use a layer 3 firewall rule to block the Facebook IP ranges associated with Whatsapp.  You can find them here: https://developers.facebook.com/docs/whatsapp/guides/network-requirements/ under the IP addresses section.  It was a complete pain to create 230 objects and 2 object groups (remember object groups only be 150 objects max) but I have successfully blocked whatsapp completely.  I know that the ip addresses may change in the future, but that is something I will just have to deal with when it comes along. ... View more

(From a distant place) Currently, my Internet connection is over 5G "Mobile broadband". There is a lot to like about it, but, many ISPs use CGNAT, (for reasons of unplanning and economy), this causes high latency, fortunately, I don't play computer games where this matters. Apparently it makes many online games unplayable, without some "jiggling around". Predictably, ISPs that use CGNAT are in denial. Allegedly the problem doesn't exist if the WAN interface can be configured to use IPv6 whilst leaving the LAN side IPv4. ... View more

@NJacobe did you ever get this issue resolved? I am experiencing a similar issue with my Informacast Paging and Meraki Switches.   Thanks! ... View more

Hello, the bug is still present! We have lived a nightmare with this. Fortunately the fix for 12 seconds help sorting out this issue. You don't imagine how it is for an entire hotel not to have TV for 24 hours before seeing this post! ... View more

Use the GPON as dumb transport only. Tunnel the APs back to an MX on the OLT side...   several options...       ... View more

I know this is old, but here's another vote to allow rules to be disabled.  My rep convinced me to "upgrade" from ASA-5525 due to them reaching EOL.   These MXs are not nearly as feature rich.  Cannot NAT across internal ports, cannot disable rules, no test (apply) then commit pattern.    On the other hand, traffic analysis is MUCH better.   My two mfu use cases:  testing a new rule;  confirming an old rule is no longer needed. ... View more

I absolutely agree on that. It would be helpful to have an up-to-date overview of all the bugs that have been identified on a particular software version. Our experience is that the "Known Issues" gives a (very) limited overview of the actual issues that are known, not just for the MG but in general. ... View more

Have any of you tried it with the MG21Es external antenna (MA-ANT-C1-B)? ... View more

Hi Ryan the link provided does not take me directly to the Bulk address changer could you provide the current on I could not find it browsing the site   Thanks ... View more

Can you please comment on any sort of Meraki IE kit?  I have areas that are looking to leverage the Mearki Cloud and a Meraki IE switch would be interesting. thanks! ... View more

I have IPoE running on multiple networks with MX6x devices  (NBN connections). You shouldn't need bridge mode imho. I've found with IPoE from the ISP, treating it like DHCP works best. On the Dashboard this is what I did and the IPv4 & IPv6 was auto configured from the ISP to the MX. Never got on a call with the ISP. Security & SD WAN > Appliance Status > Uplink > Configure WAN 1 WAN Config = Enabled Connection Type = Direct VLAN ID = leave blank, I didn't have to change this. IPv4 & IPv6 leave as Auto. It takes a good 10 minutes sometimes for the ISP to issue the IP down to the MX, but the more sites I've rolled out IPoE has been a breeze since I just copy and paste those network configs and don't have to punch in convulated usernames and passwords for PPPoE ... View more

Hey there, I stumbled upon this discussion and thought I could chime in. I completely agree that having OCR onboard would open up many new markets and possibilities for API and push notification access. ... View more

Just an update of what I did to get 5G on my ATT account.  I saw they now have the Netgear Nighthawk M6 so I purchased the pro version of that and it works GREAT.   https://about.att.com/story/2022/netgear-nighthawk-hotspots-5g.html   Its also quite small and can run battery or just off a USB-C power plug.  Has a single 2.5 G Ethernet port also. ... View more

Wiki says that Markmonitor "develops software intended to protect corporate brands from Internet counterfeiting, fraud, piracy, and cybersquatting"   Today some of our users received the same email, although we dont have such a SSID and no Meraki authentication in place and no Splash page enabled 🤔 ... View more

I have the nighthawk router as well. If this worked for you please let me know what settings you used on the router  ... View more

Hi @Brentc76  I'm just wondering if you have found a way to fix it... Cheers, Navid ... View more

Hello RumorConsumer,   I think what you were missing was the Management VLAN setting.... Navigate to Switch -> Switch Settings, at the top you define the Management VLAN. All your APs and Switches will try to grab an address from this VLAN.     ... View more

WPA3,  https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/WPA3_Encryption_and_Configuration_Guide   in MR 27.x And IPv6, https://documentation.meraki.com/?title=MX/Networks_and_Routing/IPv6_Support_on_MX_Security_%26_SD-WAN_Platforms_-_WAN and in MR 28.x ... View more