New articles: Meraki IPSec to AutoVPN Secure Access Manual Migration Guide Change: New article.   vMX Setup Guide for Megaport MVE Change: New article.   SASE Change: New category.     Access Manager: Access Manager Change: Added "It may take up to 24 hours after claiming your Access Manager licenses before you see the Access Manager menu item in your organization dashboard."     Secure Connect: Cisco Secure Connect Reserved IP Change: Updated data center name for Tokyo, JP: "NRT2".     Security & SD-WAN: Local DNS Service on MX Change: Updated prerequisite: "'Proxy to Upstream DNS' Enabled for the respective subnet".   Meraki and ThousandEyes Integration Troubleshooting Change: Added section "Account Unlinking".   Meraki MX ThousandEyes Configuration Guide Change: Added section "Unlinking an Account".     Switching: Switch Stacks Switch Cloning Troubleshooting and Replacing a Faulty MS Switch Change: Added "For Catalyst switches (including MS390) on CS firmware, it is required you power down the entire switch stack before adding / replacing a new member to avoid packet forwarding or configuration sync issues. This is only a requirement for stacks on CS firmware and not needed for stacks running IOS-XE firmware."   Cloud Management with Device Configuration Required Modifications Change: Added "All changes to configuration made by Dashboard will be logged in Organization > Monitor > Change Log and associated with the default administrator for the Dashboard organization."   MS210 Series Installation Guide MS225 Series Installation Guide MS450 Series Installation Guide Change: Added "Region-specific power cords are not included in the box. Order the appropriate power cord separately: MA-PWR-CORD-US, MA-PWR-CORD-EU, MA-PWR-CORD-UK, MA-PWR-CORD-CN, MA-PWR-CORD-IN, MA-PWR-CORD-BR, MA-PWR-CORD-TW, MA-PWR-CORD-AU, MA-PWR-CORD-AR, MA-PWR-CORD-JP".   Conversion from CLI-managed IOS XE Catalyst Switches to Cloud Management with Cloud Configuration Change: Added "C9500s cannot be onboarded as a stack. Please remove the StackWise Virtual configuration, reboot the switches, and onboard as standalone switches."   Cloud Monitoring End of Service - Transition to Cloud Management - Configuration Source: Device Enable Cloud Management for Catalyst Switches with Device Configuration Upgrading Cloud-Monitored Switches to Cloud Management with Device Configuration Change: Added "Help us improve your experience. Complete this quick survey to share your feedback on Cloud Monitoring or Configuration Source: Device."   Upgrading Cloud-Monitored Switches to Cloud Management with Device Configuration Change: Added "To onboard Catalyst switches using Cloud Management - Configuration Source: Device, select "Try new version" in the top right corner of the Inventory page to access the new onboarding experience."   Cloud-Managed EVPN Fabric Overview Change: Updated reserved IP address range: "Subnet (172.16.0.0/16) used for underlay, this subnet can be changed during fabric creation in the wizard."     Wireless: Low Power Mode and PoE negotiation Change: Added "Access points that are not operating on MR32.1+ firmware versions will continue to see previously available limited PoE information."; added "Supported APs".   Meraki Local Authentication - MR 802.1X Change: Added "RADIUS Failover and Recovery Logic"; added "Extended Local Auth Caching"; added "Operational Distinctions".   Seamless Meraki Integration with Cisco Spaces Change: Added "Only Meraki Organization administrators with full read and write access can activate the integration, per the Spaces setup documentation. Due to this, SAML dashboard administrators cannot action the integration process."   MR Meraki RADIUS 2.0 Change: Added section "RADIUS Accounting Device Profiling".   Sponsored Guest Change: Updated number of sponsor guest mail domains: "The maximum number of sponsor email domains that can be added at any one time is 50."   Adding Cisco 9800 Wireless Controller and Access Points to Dashboard Change: Added "Existing onboarded access points can be moved to another network only after changing the Access point assignment. Follow the guidelines for access points at Moving Devices between Networks. APs that are moved prior to changing the access point assignment will automatically move back to their original network."   WPA3 Encryption and Configuration Guide Change: Added "If a network has SuiteB - 192 Bit SSID configured on a lower number SSID, Dashboard will show an alert stating Wi-Fi 7 cannot be enabled because the following SSIDs do not meet the security requirements."     Cameras: Video Exports: Overview and Management Change: General article re-write.   Meraki Vision Portal Changelog Change: Added release notes for up to v1.26.7.     Systems Manager: Enrollment and Self-Service Portals for Systems Manager Change: Added "This portal is accessible via enroll.meraki.com to provide a method of manual enrollment."     Platform Management: Returns (RMAs), Warranties and End-of-Life Information Change: Added section "RMA Processing For Outdoor Cameras".   Blocking and Allowing Clients Change: Added "Placing a client on the "Block list" will block both LAN and Internet traffic."   Troubleshooting MTU Issues Change: Added "If your packet is traversing over an IPSec (non-Meraki) VPN, you will need to account for up to 100 bytes of overhead."   Mandarin Support Hotline Change: Added section "2026 Public Holidays for Mainland China".   Dashboard Alerts - Device Health Change: Added "Potential Hardware Fault".   Organization Summary Change: Added note regarding beta participants being transitioned back to the original Organization Summary page.   Clients List and Details Page Overview Change: Added "The same policy can then be applied to all the selected client(s). Note: The tool will default to "Normal" upon first opening as selected clients might have different existing policies applied to them."   Dashboard Alerts - Configuration Issues Change: Added "Bad IPv6 Assignment Configuration".   Manually Integrating Cisco Umbrella and Secure Access with Meraki Networks Change: Included Secure Access.   Clients List and Details Page Overview Change: Added "For cloud-managed C9000 in device configuration mode, client visibility requires a DNA Essentials license. Application visibility requires a DNA Advantage license".   Small-Form Factor Pluggable (SFP) and Stacking Accessories Change: Added "C8455-G2-MX: The compatible SFP modules on the C8455-G2-MX can be found in the Here.   Subscription Feature Tier Update Change: Added "Each API call can update up to 500 Networks." ... View more

  New articles: Meraki and Catalyst Center Global Overview Change: New article.   Cisco Meraki Local Status Page: Overview Cisco Meraki Local Status Page: Security and SD-WAN Cisco Meraki Local Status Page: MG Cellular Gateways Cisco Meraki Local Status Page: Catalyst IOS XE Switches Cisco Meraki Local Status Page: MS Switches Cisco Meraki Local Status Page: MR Wireless Cisco Meraki Local Status Page: Campus Gateway Change: New articles.     Security & SD-WAN: Meraki and ThousandEyes Integration Troubleshooting Change: Added troubleshooting use case: "The Meraki Administrator account was deleted and the integration is non-functional".   MX Cold Swap - Replacing an Existing MX with a Different MX Change: Added "Adding or replacing an online/offline spare MX in the dashboard network will cause a brief connectivity loss on the primary MX due to the initialization of the HA configuration."     Switching: MS Switch Access Policies (802.1X) Change: Added "RADIUS defaults are: RADIUS authentication attempt = 3 times. RADIUS authentication timeout = 5 seconds. Please note that those values cannot be modified."   Cloud Configuration: Release Versions and Highlights Change: Added "UAC Automatic Fallback to Preferred Uplink (new with 17.15.4.1+)".   VRF Change: When running a traceroute to an IP address within a VRF, you must specify the VRF or else the traceroute will fail. Sourcing traceroute from a specific VRF can be done under the Switch Details, Tools page.   SecurePort Change: Added "As a best practice, MRs and MS should belong to the same network. If your APs and switches must belong to different networks please contact meraki support."   Enable Cloud Management for Catalyst Switches with Device Configuration Change: Added section "Prerequisites".   IOS XE image upgrades (Cloud Monitoring for Catalyst switches) Change: Updated Caveats/known issues: "Image upgrade is currently only supported on the following target versions of IOS XE:17.9.4a, IOS XE 17.9.5 or IOS XE 17.12.3, 17.15.3 and 17.15.4."   Cloud Monitoring Overview and FAQ Change: Added "Switches operating in "Configuration Source: Device" mode are not supported for cloud-initiated firmware upgrades".   VLAN Profiles Change: Added sections "Configuring the VLAN Database from the Local Status Page" and "Modify the active VLANs from the Local Status Page".     Wireless: Splash Page Details for Meraki MR Change: Added "25 Free SMS text messages. This feature is currently only available in the United States. If you are in a different country, SMS authentication is still a beta feature, and we cannot guarantee its reliability."   RF Profiles Change: Added "APs (like CW9166I and CW9178I) that have a flex radio that supports 5 + 6 GHz and are deployed in a regulatory domain that does not support 6 GHz the Flex radio will use 5 GHz and defaulting to Dual 5 GHz operation. The Flex radio settings will not be present in the RF profile when deployed in a regulatory domain that does not support 6 GHz. This will lock each AP and 5 GHz radio into a 5-hi and 5-lo mode of operation where only specific UNII bands and channels are allowed per radio."; added section "802.11ax".     Cameras: Meraki Vision Portal Changelog Change: Added release notes for up to v1.26.4.     Platform Management: Meraki Hardware and Software Onboarding Guide Change: Added section "How to Locate the Order Claim Key".   LLDP Support on Cisco Meraki Products Change: Added "Note that, while it's possible for multiple CDP or LLDP enabled devices to be connected to a single switch port, only a single CDP or LLDP entry is supported for display on the client info for a switchport, both in the Dashboard UI or via the API."   Organization Settings Change: Added "If two-factor authentication is enabled, users will need to contact support to assist in disabling 2FA." ... View more

  New articles: Overview and FAQ: Cisco Meraki SMS MFA Deprecation Change: New article.   FAQ: USB Modem Deprecation of Support Change: New article.     Security & SD-WAN: Threat Protection Change: Added "MX64 and MX65 devices on firmware releases prior to MX 18.1.7.13, and all other MX devices on firmware prior to MX 17.6 run versions of Snort 2 that will stop receiving updates after December 18, 2025. To ensure that such devices continue to receive updated rule sets, please ensure they have been upgraded to MX 18.1.7.13 or any higher major revision before then. In addition, any devices that reached their End of Support dates prior to Dec 18, 2025 will no longer receive further ruleset updates after this date. For more information, please refer to this Snort blog post."   Using Site-to-site VPN Translation Change: Added "1:Many VPN NAT cannot be configured for the AnyConnect Client VPN subnet."   MX Sizing Guide & Principles Change: Added "Maximum Routes".     Switching: Cloud Configuration: Release Versions and Highlights Change: Added "Firmware Upgrade Advisory for C9300L: Due to a known issue, 9300L switches will not upgrade when a network upgrades to IOS XE 17.15.4. If your network is scheduled for an upgrade from a CS firmware version to IOS XE 17.15.4 version, all other devices will upgrade as planned and C9300L models will remain on the current CS firmware version.  This measure is in place to prevent an issue where 9300L may experience a problem upgrading to 17.15.4, attempt to roll back to the original software image, and then fail to properly boot. Once this issue has been patched, the switches will upgraded normally."   Switch Ports Change: Added "This is NOT a supported configuration. For LAG to work properly, both devices should be configured to use LACP negotiation.".   Multicast Overview, Configurations, and Best Practices Change: Added "MS (and Dashboard-managed CS) switches do not currently support Fast Leave on IGMPv2."     Wireless: OpenRoaming integration with Cisco Spaces Change: Added section "Frequently Asked Questions".   CW9172I Installation Guide Change: Updated power consumption: "25.5W (802.3at required) for full operation of AP." and "The CW9172I needs 802.3at, (up to 30W from the switch, or 25.5W at the AP) for full operation of AP."     Cameras: Meraki Vision Portal Changelog Change: Added release notes for up to v1.26.0.     General Administration: Meraki End-of-Life (EOL) Products and Dates Change: Added "MV Gen 2 Cameras".   Organization Settings Change: Added "When an OAuth 2.0 integration is explicitly authorized, it operates independently of the login IP range restrictions. This means that applications using OAuth 2.0 tokens can access permitted resources from any IP address, regardless of the IP range controls you have configured for standard logins or API key usage. OAuth 2.0 integrations can be revoked at any time through the integrations page: Organization > Integrations > My Integrations."   AI Assistant for Networking Product Updates Change: Added "Sep 22, 2025" updates.   Cisco Meraki Canada Region Change: Updated feature availability: "Per-Device and Subscription Licensing, and Cloud Management for Cloud/Device Config/Hybrid Operating modes are currently not supported in the Meraki Canada Region."   Subscription - Licensing SKUs Change: Added LIC-MT-E. ... View more

New articles: Pre-download with Local Firmware Fetch Change: New article.   Meraki Authentication Server Certificate Rotation - July 2025 Change: New article.   Assa Abloy Door Lock Integration with MRs Change: New article.   Client360 - Cloud Change: New article.   Table Summarization - Public Beta Change: New article.   AI Assistant for Networking Product Updates Change: New article.     Security & SD-WAN: Content Filtering Change: Added sections "Using the Catch-All Wildcard (*) in URLs" and "Patterns for Blocking or Allow Listing Specific URLs".   NAT Exceptions with Manual Inbound Firewall on MX Security Appliances Change: Added "The inbound firewall also affects services such as Client VPN (AnyConnect or IPSec) and rules must be configured towards the MX's uplink IP (or virtual IP, if in a warm-spare configuration using one) in order for those connections to be allowed."     Switching: FAQs: Migrate to Meraki management mode Change: Added "Please note, when migrating cloud born (-M) models, such as C9300-M, to CLI/DNA management, the Switch must have a valid Meraki license and a Purchase Order for a 3Y or greater DNA license must be opened. If SmartNet support contract is desired after migrating -M to CLI/DNA management, please open a support case to request a PID change."     Wireless: Cloud-Managed Hybrid Operating Mode for Catalyst Wireless LAN Controllers - What's New Change: Added CW9800H1, CW9800H2 and CW9800M and Cisco Wireless 9178I, Cisco Wireless 9176I/D1 and Cisco Wireless 9172I/H.   Cloud-Managed Hybrid Operating Mode for Catalyst Wireless LAN Controllers Design Guide Cloud-Managed Hybrid Operating Mode for Catalyst Wireless LAN Controllers FAQ Cloud-Managed Hybrid Operating Mode for Wireless Controllers LAN Controllers Requirements Change: Added CW9800H1, CW9800H2 and CW9800M.   Extending the LAN with a Wireless Mesh Link Mesh Deployment Guide Change: Added "Multicast protocols, including CDP, LLDP, VTP, etc., are not supported over a wireless mesh link."   Adding Catalyst 9800 Wireless Controller and Access Points to Dashboard Change: Added "If your organization is using per-device licensing you must use the Network-wide > Configure > Add Devices page to add IOS XE devices to an existing network."   Auto RF: Wi-Fi Channel and Power Management Change: Added section "6 GHz Channel Selection"; added section "AFC".   AI-RRM Change: Added "AI-RRM provides the best performance in the 6 GHz band, including dynamic channel width up to 320 MHz, and AFC SP (Standard Power) Transmit Power Control with extended power budget. In 5 GHz, AI-RRM can support channel width up to 160 MHz where the device is capable."     Cameras: Meraki Vision Portal Changelog Change: Added release notes for up to v1.25.3.   MV Smart Camera FAQ Change: Added "How do I opt in to Intelligence Training?"; added "How do I opt out to Intelligence Training?"; added "What is changing about Camera Intelligence Training?".     General Administration: Meraki End-of-Life (EOL) Products and Dates Change: Added "MS350-24-HW" and "MS350-48LP-HW".   Information for Cisco Meraki for Government users Change: Added "Campus Gateway" to the list of unsupported devices.   AI Assistant for Networking - Public Beta Change: Added "Cisco handles your data responsibly. See the Privacy Data Sheet."   ... View more