Documentation Digest: July 10th - July 17th, 2025

Hannah-C
Meraki Employee
Meraki Employee

Documentation Digest: July 10th - July 17th, 2025

New articles:

Pre-download with Local Firmware Fetch

Change: New article.

 

Meraki Authentication Server Certificate Rotation - July 2025

Change: New article.

 

Assa Abloy Door Lock Integration with MRs

Change: New article.

 

Client360 - Cloud

Change: New article.

 

Table Summarization - Public Beta

Change: New article.

 

AI Assistant for Networking Product Updates

Change: New article.

 

 

Security & SD-WAN:

Content Filtering

Change: Added sections "Using the Catch-All Wildcard (*) in URLs" and "Patterns for Blocking or Allow Listing Specific URLs".

 

NAT Exceptions with Manual Inbound Firewall on MX Security Appliances

Change: Added "The inbound firewall also affects services such as Client VPN (AnyConnect or IPSec) and rules must be configured towards the MX's uplink IP (or virtual IP, if in a warm-spare configuration using one) in order for those connections to be allowed."

 

 

Switching:

FAQs: Migrate to Meraki management mode

Change: Added "Please note, when migrating cloud born (-M) models, such as C9300-M, to CLI/DNA management, the Switch must have a valid Meraki license and a Purchase Order for a 3Y or greater DNA license must be opened. If SmartNet support contract is desired after migrating -M to CLI/DNA management, please open a support case to request a PID change."

 

 

Wireless:

Cloud-Managed Hybrid Operating Mode for Catalyst Wireless LAN Controllers - What's New

Change: Added CW9800H1, CW9800H2 and CW9800M and Cisco Wireless 9178I, Cisco Wireless 9176I/D1 and Cisco Wireless 9172I/H.

 

Cloud-Managed Hybrid Operating Mode for Catalyst Wireless LAN Controllers Design Guide

Cloud-Managed Hybrid Operating Mode for Catalyst Wireless LAN Controllers FAQ

Cloud-Managed Hybrid Operating Mode for Wireless Controllers LAN Controllers Requirements

Change: Added CW9800H1, CW9800H2 and CW9800M.

 

Extending the LAN with a Wireless Mesh Link

Mesh Deployment Guide

Change: Added "Multicast protocols, including CDP, LLDP, VTP, etc., are not supported over a wireless mesh link."

 

Adding Catalyst 9800 Wireless Controller and Access Points to Dashboard

Change: Added "If your organization is using per-device licensing you must use the Network-wide > Configure > Add Devices page to add IOS XE devices to an existing network."

 

Auto RF: Wi-Fi Channel and Power Management

Change: Added section "6 GHz Channel Selection"; added section "AFC".

 

AI-RRM

Change: Added "AI-RRM provides the best performance in the 6 GHz band, including dynamic channel width up to 320 MHz, and AFC SP (Standard Power) Transmit Power Control with extended power budget. In 5 GHz, AI-RRM can support channel width up to 160 MHz where the device is capable."

 

 

Cameras:

Meraki Vision Portal Changelog

Change: Added release notes for up to v1.25.3.

 

MV Smart Camera FAQ

Change: Added "How do I opt in to Intelligence Training?"; added "How do I opt out to Intelligence Training?"; added "What is changing about Camera Intelligence Training?".

 

 

General Administration:

Meraki End-of-Life (EOL) Products and Dates

Change: Added "MS350-24-HW" and "MS350-48LP-HW".

 

Information for Cisco Meraki for Government users

Change: Added "Campus Gateway" to the list of unsupported devices.

 

AI Assistant for Networking - Public Beta

Change: Added "Cisco handles your data responsibly. See the Privacy Data Sheet."

 

0 Replies 0
Get notified when there are additional replies to this discussion.