New articles:
Change: New article.
Change: New articles.
Security & SD-WAN:
Change: Added troubleshooting use case: "The Meraki Administrator account was deleted and the integration is non-functional".
Change: Added "Adding or replacing an online/offline spare MX in the dashboard network will cause a brief connectivity loss on the primary MX due to the initialization of the HA configuration."
Switching:
Change: Added "RADIUS defaults are: RADIUS authentication attempt = 3 times. RADIUS authentication timeout = 5 seconds. Please note that those values cannot be modified."
Change: Added "UAC Automatic Fallback to Preferred Uplink (new with 17.15.4.1+)".
Change: When running a traceroute to an IP address within a VRF, you must specify the VRF or else the traceroute will fail. Sourcing traceroute from a specific VRF can be done under the Switch Details, Tools page.
Change: Added "As a best practice, MRs and MS should belong to the same network. If your APs and switches must belong to different networks please contact meraki support."
Change: Added section "Prerequisites".
Change: Updated Caveats/known issues: "Image upgrade is currently only supported on the following target versions of IOS XE:17.9.4a, IOS XE 17.9.5 or IOS XE 17.12.3, 17.15.3 and 17.15.4."
Change: Added "Switches operating in "Configuration Source: Device" mode are not supported for cloud-initiated firmware upgrades".
Change: Added sections "Configuring the VLAN Database from the Local Status Page" and "Modify the active VLANs from the Local Status Page".
Wireless:
Change: Added "25 Free SMS text messages. This feature is currently only available in the United States. If you are in a different country, SMS authentication is still a beta feature, and we cannot guarantee its reliability."
Change: Added "APs (like CW9166I and CW9178I) that have a flex radio that supports 5 + 6 GHz and are deployed in a regulatory domain that does not support 6 GHz the Flex radio will use 5 GHz and defaulting to Dual 5 GHz operation. The Flex radio settings will not be present in the RF profile when deployed in a regulatory domain that does not support 6 GHz. This will lock each AP and 5 GHz radio into a 5-hi and 5-lo mode of operation where only specific UNII bands and channels are allowed per radio."; added section "802.11ax".
Cameras:
Change: Added release notes for up to v1.26.4.
Platform Management:
Change: Added section "How to Locate the Order Claim Key".
Change: Added "Note that, while it's possible for multiple CDP or LLDP enabled devices to be connected to a single switch port, only a single CDP or LLDP entry is supported for display on the client info for a switchport, both in the Dashboard UI or via the API."
Change: Added "If two-factor authentication is enabled, users will need to contact support to assist in disabling 2FA."
