I'm a bit slow posting.  I got mine a couple of days ago. ... View more

If you are really unlucky, and it is just AutoVPN having the issue, you can configure a specific port to be used and port forward it to the MX. https://documentation.meraki.com/MX-Z/Site-to-site_VPN/Site-to-site_VPN_Settings#NAT_Traversal ... View more

I agree wih @MRCUR because this creates a loop free design. ... View more

Is the default gateway for the PC the MX? ... View more

Is the port that the AP is plugged into configured to use VLAN1?  Or another test - can you plug a notebook into the switch port used by the AP and get an IP address and access the Internet? ... View more

Do the rainbow lights ever stop?  What do they settle on? ... View more

It is covered in step 3 of the document link you posted.   If a default SSID is being broadcast, connect your device to it If no known default SSIDs are present, set up a manual wireless network connection  For the SSID name, use 'meraki-<MAC_Address>' e.g. 'meraki-XX:XX:XX:XX:XX:XX' ... View more

Have you tried manually putting in the SSID? ... View more

You can configure the Cisco Meraki solution to send data to a Syslog server that you setup. https://documentation.meraki.com/zGeneral_Administration/Monitoring_and_Reporting/Syslog_Server_Overview_and_Configuration   From there you can analyze it in any product you wish. ... View more

You might be best to contact a local Cisco partner so you get the correct part.  The partner locator can be found here: https://locatr.cloudapps.cisco.com/WWChannels/LOCATR/openBasicSearch.do ... View more

Just a note if this is a cold spare - don't add it to inventory until you need it.  Otherwise if you have 6 devices with 5 licences you will start getting licence violation warnings. ... View more

If you increase your PSK length to 11 digits or more you practically don't have a problem anymore.   A better solution is to use WPA2-Enterprise mode, because you can use this with 802.11r without issue.  You can use this either with RADIUS (if you have Active Directory for example) of it you have a smaller number of users you can use Meraki Authentication.   You could also use Meraki Systems Manager with Systems Manager authentication, which uses certificate based authentication. ... View more

Were your MR42E's running an 26.x version of firmware by chance? ... View more

I agree with the prior posts.   The closest you could do would be to lookup the ASN used by specific streaming providers (if they have one), get all the IP address blocks allocated to them, and then load them all in.   To look up the ASN you use the "whois" service.  There is usually a whois service for each "RIR".  So you need to locate the RIR that your streaming provider is in, and then look them up.  If they are in multiple regions you might need to use multiple whois services.  Painful. https://en.wikipedia.org/wiki/Regional_Internet_registry   ... View more

I haven't heard of any rumours of Meraki applying for FIPS140-2 compliance (to be specific, FIPS140-2 relates to VPN and crypto).   However the 15.x code train (not available to the public yet) has significant changes on the VPN side - and perhaps those changes might make FIPS140-2 possible.   One significant issue is that FIPS140-2 is given to specific software versions.  This would mean you could not upgrade the firmware to maintain compliance.  This kinda violates the whole Merai principle where the software is kept up to date automatically for you.   The last part of this year is going to prove to be exciting in this area! ... View more

The Meraki community has thrived due to the efforts of so many (and thanks @CarolineS for calling out all those mentions).  With any luck we can resist assimilation with the Borg, and keep the community independent.   I would also like to thank FedEx. They spent a lot of time delivering swag.  My FedEx delivery guy now knows me personally, and although he doesn't know why, he has recognised he visits every month.  ... View more

I think you missed a critical step - and that is to simply plug in the switch and add it to your network, and then leave it for 45 minutes to upgrade its software.   If the software version was the same you should not have had any issues. ... View more

It sounds like you are going to need to open a support case with Twilio. ... View more

Well done @CarolineS - so where are the photos from the Office showing the cake? ... View more

The MS120 is a layer 2 switch. I'm not sure it supports ACLs. ... View more