VLAN tagging on WAN

SOLVED
BradM
Here to help

VLAN tagging on WAN

Is it good idea to use VLAN tagging on the Internet ports? I am using VLANS on my LAN connections, but should I enable vlan tagging on my MX65?

 

Would it be useful considering I'm using the MX65 for site-to-site to 2 other locations which are also using MX65's and have vlans configured for those LANs as well?

1 ACCEPTED SOLUTION
PhilipDAth
Kind of a big deal
Kind of a big deal

The settings for your WAN ports are dictated by your service provider usually.  So whatever they say you have to use to connect - that is what you have to use.

View solution in original post

2 REPLIES 2
PhilipDAth
Kind of a big deal
Kind of a big deal

The settings for your WAN ports are dictated by your service provider usually.  So whatever they say you have to use to connect - that is what you have to use.

Makes sense. Thanks for the help. I will run this by my ISP

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels