user access to only one section of the dashboard

Solved
ZDonaldson
Getting noticed

user access to only one section of the dashboard

All,

 

is there a way to to give a particular user access to only one portion of the dashboard?

 

In any particular network we have MX appliances, switches, and wireless APs.  I want to provide my helpdesk staff access to the AP settings and config, but not to any of the other tabs on the dashboard.  

 

 

Zane D - IT Manager in Sin City NV
1 Accepted Solution
PhilipDAth
Kind of a big deal
Kind of a big deal

You can't go down to that level sorry.  Mostly you can just grant access to a network (and not others as a result).

View solution in original post

2 Replies 2
PhilipDAth
Kind of a big deal
Kind of a big deal

You can't go down to that level sorry.  Mostly you can just grant access to a network (and not others as a result).

Adam
Kind of a big deal

If it is a particularly strict need, you could clone the existing network and just put the devices you want in one of the networks and grant them access to that network.  Although this isn't particularly ideal unless you have to accomplish that.  Solely a workaround. Otherwise, as @PhilipDAth said, permissions aren't that granular. 

 

Adam R MS | CISSP, CISM, VCP, MCITP, CCNP, ITILv3, CMNO
If this was helpful click the Kudo button below
If my reply solved your issue, please mark it as a solution.
Get notified when there are additional replies to this discussion.