We discovered that it was only the MR70's (running 26.0 software) that had the issue.. All MR's are now at 26.6.1 and no noice in the logs .. 😀 Remaining "noicers" are only workstations as others see in this forum ..
... View more
Hi @joe ! Is there by any chance plans for including security center information ? (or did I miss it going over the beta? Might very well be..) Could be nice in the overview / notifications .. Otherwise a well done overhaul .. 😀
... View more
@joe Thanx .. 🙂 I'm checking it out .. Looks crisp .. Needs something on the security center part though .. Could be nice to have it in the overview part .. With Highest regards Thyge
... View more
Hi @Matttt -.- We still see lots of these .. And we also tried the new switch sw, but reverted, since it did no good in the matter. It seems that uplinks/trunks and workstation links are affected and not selective 😉 All switch-types are affected. It bursts 10-15 entries in the log in each occurance.
... View more
Excellent idea with the lab .. I always do/recommend this in larger environment (pre-prod setup). I don't have the MR32, so I did not get any indications of instability .. Worrying indeed, could You post your responses from the Support case, when things turn brigther ? In any case: Good luck tracking down the issue .. With highest regards Thyge
... View more
Maybe it's the new telekinetic interface at the portal ? "Your MX has now been moved .. " 🙂 Nah .. sorry, bad joke .. Hope it all clears up .. /Thyge
... View more
Hi .. (@joe) Just curious .. What's in store for us ? I see that the version is 2.4.2 now, and was wondering what the near future brings of exiting goodies in the app ? With highest regards Thyge
... View more
Well .. That seemed to get things moving ? The funny look is now gone this morning .. 😀🕺🎉 It will be interesting to see what the answer will be in the case .. / Update: From the Meraki Support team : I have received confirmation from development that yes the issue has been resolved. It was a backend dashboard error. / End of Update
... View more
@AustinCWhoops .. 🙄 I'll log a case immediately. Just posted here, and got a reply that would get back, chasing the case. I still think the info should be streamed here as well as in a closed forum as in the Meraki Support.
... View more
Hi @redsector .. I only have AP's connected to the ports doing this .. No issues on uplink ports as well as You observe .. Will be interesting to hear what the Engineers say ?
... View more
I will listen in on this .. We see these A LOT!! (like a zillion times a day) and I should be much mistaken if all the cables/plugs were faulty everywhere in the installation .. Any news ? (SW: MS 11.30)
... View more
@Priesty: Yep. That's a good one. It the equipment was aquired through the CMNA or similar, the renewal course is also a way of getting a couple of Years of license.. With Highest regards Thyge
... View more
I'm with You there @Twitch .. As I read it, the ECMS2 is last part if a set of education courses with tests and all .,. I too would like to finish what I start, and have not seen one single announcement for this Course. As to the education team is limited and only can do so much, it somewhat collides with the facts from this thread with "multi-million$ installations" and all .. I would also like to hear some official viewpoints from Meraki on this .. With highest regards Thyge
... View more
Regarding my image (with the ports) 😉Yep, got it .. It was just to show that the network actually had a MX device 🙂 I found the reason (marked very green in the thread) thanx to You all .. I'm humbled 😉 With highest regards Thyge
... View more
Thanx a LOT, jdsilva! That did it! How great, that You are awake, and can guide a rookie like me ! I whish I could give more than one Kudo, since the answer was swift, exact and illustrative, all at the same time .. Thanx 😀 from the high North (Denmark 😱) With highest regards Thyge
... View more
//
//
LITHIUM.InformationBox({"updateFeedbackEvent":"LITHIUM:updateAjaxFeedback","componentSelector":"#informationbox_69b26ef147898a","feedbackSelector":".InfoMessage"});
LITHIUM.InformationBox({"updateFeedbackEvent":"LITHIUM:updateAjaxFeedback","componentSelector":"#informationbox_69b26ef147898a_0","feedbackSelector":".InfoMessage"});
LITHIUM.InformationBox({"updateFeedbackEvent":"LITHIUM:updateAjaxFeedback","componentSelector":"#informationbox_69b26ef147898a_1","feedbackSelector":".InfoMessage"});
LITHIUM.InformationBox({"updateFeedbackEvent":"LITHIUM:updateAjaxFeedback","componentSelector":"#informationbox_69b26ef147898a_2","feedbackSelector":".InfoMessage"});
LITHIUM.AutoComplete({"options":{"autosuggestionAvailableInstructionText":"Auto-suggestions available. Use Up and Down arrow keys to navigate.","triggerTextLength":4,"autocompleteInstructionsSelector":"#autocompleteInstructionsText_69b26eeee13f2f","updateInputOnSelect":true,"loadingText":"Searching...","emptyText":"No Matches","successText":"Results:","defaultText":"Enter a search word","autosuggestionUnavailableInstructionText":"No suggestions available","disabled":false,"footerContent":[{"scripts":"\n\n;(function($){LITHIUM.Link=function(params){var $doc=$(document);function handler(event){var $link=$(this);var token=$link.data('lia-action-token');if($link.data('lia-ajax')!==true&&token!==undefined){if(event.isPropagationStopped()===false&&event.isImmediatePropagationStopped()===false&&event.isDefaultPrevented()===false){event.stop();var $form=$('