MX CPU / MEM overview in dashboard ?

[Thygesen]

Hi All !

I'm looking for the graphs displayed in this link

https://documentation.meraki.com/MX/Monitoring_and_Reporting/Device_Utilization

They boast about the ability to see exiting stuff in the summary report ..

I guess I haven't configured my report right, because I can't seem to locate the kind of graph they hint at ..

Any suggestions ?

With Highest Regards

Thyge

[ww]

Organization  》 summary report

Make sure to select a network  with mx.  It should be on the bottom left

[Thygesen]

Hi ..

The summary report is there, but there is not the graph mentioned ..

The MX is also there, as You can see here:

/ Thyge

[ww]

And you made  sure the mx  is selected  (top left, networks(s), A single network) of summary report?

[jdsilva]

@Thygesen the image you're showing us is not the Summary Report. You need to navigate to Organization > Summary reports as @ww said. 

[jdsilva · Accepted solution]

Hopefully this will help?

[PhilipDAth]

I wish I could give double kudos to @jdsilva .  It is critical you have a network selected.  If you have "Organization" selected for the summary report you don't get utilization graphs.

[Thygesen]

I highly agree !! 2xKudo's from mee too!

WOW That sure did the trick ..

THANX a LOT !!

With highest Regards

Thyge

[Thygesen]

Thanx a LOT, jdsilva!

That did it! How great, that You are awake, and can guide a rookie like me !
I whish I could give more than one Kudo, since the answer was swift, exact and illustrative, all at the same time ..

Thanx 😀 from the high North (Denmark 😱)

With highest regards

Thyge

[Thygesen]

Regarding my image (with the ports)

😉Yep, got it .. It was just to show that the network actually had a MX device 🙂

I found the reason (marked very green in the thread) thanx to You all ..

I'm humbled 😉

With highest regards

Thyge