Thanks Philip.   That's a great suggestion. I will go through that link. ... View more

For Windows 7, yes.   For Windows 10, the Network Reset function will also reinstall your network drivers, above and beyond resetting tcp/ip and winsock.  ... View more

One benefit that Sonicwall has with their content filtering is on their block page you have the option to request the reclassifcation of a blocked site. They were pretty quick at getting back to you with an answer and any changes were relfected worldwide pretty quickly.    It would be nice if the same was possible with Meraki. I get that SSL pages are hearder as you dont get a block page. ... View more

@SoCalRacer You have to contact Meraki support to disable 802.11k.  They do it on a per MR and per SSID basis.  You can reference my case number so they have some context: 03790307   The test RingCentral wants me to try is to determine if this is iOS or RC app specific.  I would have to call support to have them "break it" again and then run to iOS devices at the same time while waiting for the RC app call to interrupt.  Then see if it happens on a different voip app, Dialpad is the one I am planning to test with.  You can see why I don't have time for this 😉     ... View more

Thanks for info! ... View more

@vassallon 25.13 ... View more

Turned out it was the other side that was the problem.    Their IT-department did something (not wanting to tell me what), and hey presto! It worked...    Thanks to all who replied. ... View more

It's an upcoming remodel, they were talking about digging a trench for the Emergency Generators power cables and running the telecom through a separate pipe, but next to one another. I don't know the specs on the generator, but it's a commercial size for a 3 story building. ... View more

"Kneel before Zod" lol!   That is all correct.  I forgot to reply earlier that the ISR is perfectly good way to work around getting your /26 more properly usable if your ISP won't change.  I have been battling and escalating with Comcast for nearly a month already on this same topic.  They just won't change it.  They will put in their own router (and charge) or we can do like you are planning.. ... View more

@BrandonS Cisco sold off Linksys, that's why you don't see that name on any of their products anymore.   https://www.cisco.com/c/en/us/about/corporate-strategy-office/acquisitions/belkin.html ... View more

May i also ask, Is the Meraki topology accurate?   Thanks everyone. ... View more

Sorry, I did not notice your question until today.  Opened a Case with Meraki, and they had someone else who had the same problem.  They had to roll the firmware back with them. So we had Meraki do the same, and turn off updates.  No issues with customer 7925 phones since.   Current version: MR 25.9 ... View more

Just curious if the trouble is with wired or wireless connection or both?  I am troubleshooting a problem with RingCentral on iPhone and have discovered an issue with MR v26.  I am not sure if it could also be with MXW as well. ... View more

Take a quick look at this post on how to make the monitoring page dynamic. https://community.meraki.com/t5/Managed-Services/Need-Dynamic-MSP-Dashboard-Monitoring/m-p/1608   You are going to want to use Organization/Overview.  You will probably want to use one of the table views, and craft a filter to display what you want to see (such as the one shown in the screenshot to show offline devices).   ... View more

@BrandonS wrote: I am working on the same setup right now and support advised me to make sure the MS120 you are using as a "breakout" switch between the provider side and the MX is assigned an internal IP statically to ensure it does NOT get a public IP.  You don't really want or need your MS120 having a public IP for any reason. Yeh, this has caused me grief in the past. The problem with making sure the MS doesn't get an IP is that if it loses connectivity it will start to DHCP for an address on every port, and on any and every VLAN it can find. If your provider assigns addresses via DHCP, or if you have a limited amount of dynamic IP's available, there's a good chance the MS will grab one and use it to talk to the cloud.      ... View more

Sounds like browser issue maybe?  I seem to recall having a similar issue before where static IP info I put in and saved didn't take and I had go apply it again. ... View more

@jon1 wrote: I see now you already posted that document! Sorry. No worries.  Good luck and let us know what you work out. ... View more

Make sure the ports are enabled.    On my MX65, the ports supply two MR33 without issue.  It is my understanding that the ports are dynamically powered.  If they don't sense a power draw, they will not supply power.   ... View more

@mredy365    Any luck with your problem? ... View more

We find that is certainly worth doing a proper survey if you're doing a larger install when all AP's need to be justified. Ekahau is very good for this and i'd recommend taking a look or getting someone in ... View more

Oh hey, maybe the Summary Reports will work for you?   Under Organization > Monitor > Summary report you can view the summary report for your MX network. In that report is the Top N blocked sites shown a few different ways:   You can set these reports up to be emailed to you every day/week/month etc. It's not real-time alerting to blocked URLs, but you can see every day what was blocked the previous day in an email to your inbox.  ... View more

There is a KB article and guide that should help too:   https://documentation.meraki.com/zGeneral_Administration/Tools_and_Troubleshooting/VoIP_on_Cisco_Meraki%3A_F.A.Q._and_Troubleshooting_Tips   Cisco Meraki VoIP Deployment Guide ... View more

I have the blog and some Google news alerts in my RSS feed for Meraki.   ... View more