Meraki

TaylorJohnson · ‎Jan 12 2024

Okay, thanks John.

ddresen · ‎Jan 11 2024

Yeah, it's a home network, and even though I work from home, not interested in paying Cisco for service. I may pull the entire HW config out and go with a good home mesh.

ZEUS_Patrick · ‎Jan 10 2024

Thats exactly what I was looking for, thanks a lot!

PhilipDAth · ‎Jan 10 2024

That is for the MS220, not the MS120. It says the MS220 have gone EOL then replace them with MS120.

PhilipDAth · ‎Jan 10 2024

Are you sure the app ID is correct?

BlakeRichardson · ‎Jan 10 2024

@sysadminshipley What type of devices are you migrating? If they are iOS devices that will need to be factory reset.

ConnorL · ‎Jan 10 2024

There's also the AutoVPN white paper that explains it quite nicely: https://meraki.cisco.com/product-collateral/auto-vpn-whitepaper/?file

Zack24 · ‎Dec 15 2023

exactly, I notice they change it 😀

rhbirkelund · ‎Dec 7 2023

I*m not completely sure if this is a bug, because we've alsp noticed this on one of our customers last week, where they have begun experiencing lots of disconnects from the wireless network. We have an open case about it, but so far haven't gotten anything specific yet. However, I haven't heard any reports since we suggested the customer to forget the network and reconnect (delete the connection profile).

Nigel_MC · ‎Dec 6 2023

Thanks for your help, Connor. Yup, issued solved after assigning my SM licenses to my SM network. I can now enrol my PCs.

ConnorL · ‎Dec 1 2023

Ah if the device is coming online then that's good! When you say there's no feed, is it constantly buffering or is the feed just dark/black? 9 times out of 10 it'll be an incorrect aperture setting if the feed is black. I will drop you a DM now as I'm curious to see the MV.

Michael_K · ‎Nov 30 2023

Extending the "Geo-Permission" was the solution 👍.

ConnorL · ‎Nov 29 2023

Huh, SSP is just the Self Service Portal - this tool allows users to install/push apps to their device(s) via a website. It might've just been a timing coincidence that this worked as it should not impact the device-specific permissions. Nevertheless, glad you got the issue resolved 🙂

StarBlink · ‎Nov 17 2023

Balanced yes. OK makes sense now...

Inderdeep · ‎Nov 15 2023

As always, somebody has claimed already which means you need to figure out where it was claimed, May be Support can help here @Davlat

ConnorL · ‎Nov 13 2023

Not natively no, there are some workarounds such as using a vMX with Local Auth (https://apicli.com/2021/12/13/meraki-mr-802-1x-with-azure-active-directory/ (please note this is a non-Meraki link)) or Trusted Access (https://www.youtube.com/watch?v=5PDpnsWtmlE)

ConnorL · ‎Nov 13 2023

I'd advise to open a Support case if you haven't already, as Support should be able to take a look at the state of the PoE. Also worth trying to move the camera to a different switch port, if the issue still occurs you may wish to reach out to the manufacturer to determine if there any known compatibility issues, or PoE specifics that may be causing this issue.

TomMc · ‎Nov 13 2023

Thanks Connor and Blake for the confirmation, appreciate it

PhilipDAth · ‎Nov 13 2023

My understanding (and hopefully, someone will correct me) is that the sensors use BLE. They simply broadcast their info. Every MV in range hears the broadcast. The first MV to report in the info to the dashboard "wins". That is why you can't select which device is the gateway. They are all the gateway.

PhilipDAth · ‎Nov 9 2023

If the MX is not running a current stable firmware (or better) I would take the opportunity to upgrade it (which will do the reboot you mention as well).

BlakeRichardson · ‎Nov 9 2023

Thanks @ConnorL that worked a treat, I was using HTTP but changed to HTTPS and is working now. It would be great to have some documentation around Android settings and the best way to configure them. Coming from managing iOS devices to recently including some Android I am finding documentation for Android somewhat lacking.

erinoreilly · ‎Nov 9 2023

I'm thinking that since the radio profile that is being applied though our dashboard is the same one used by APs surrounding me in my lab, that I need to follow the same instructions for "Using Channel Widths Other than 20 MHz" from this page: Conducting Site Surveys with MR Access Points - Cisco Meraki and create a radio profile with a unique SSID such as "surveyor" Can you confirm? Thanks so much!

PaulF · ‎Nov 8 2023

@beks88_ We support groups syncing with: Azure SAML and AD

ConnorL · ‎Nov 6 2023

Hmm, that's certainly one that we'd need Zebra's help with, as ADB logging should help pinpoint what's preventing the device from booting into the launcher. I'll DM you for a little more info.

amabt · ‎Oct 22 2023

Thank you. I will double check as I though you can hide the Settings App. Looks like we will have to provide instructions for users to check each device.

About ConnorL

ConnorL

Connor Loughlin

Community Record

Badges