About rwiesmann

EtienneleComte · ‎06-08-2020

Hi Roger, Confirmation from Meraki support: 3600 seconds. Best regards, Etienne

rwiesmann · ‎06-05-2020

to cancel the scheduled firmware upgrade, check out the following documentation. https://documentation.meraki.com/zGeneral_Administration/Firmware_Upgrades/Managing_Firmware_Upgrades#Rescheduling_or_Canceling_a_Firmware_Upgrade hope this helps roger

rwiesmann · ‎06-05-2020

Hey, here is the documentation how to manage firmware of meraki. https://documentation.meraki.com/zGeneral_Administration/Firmware_Upgrades/Managing_Firmware_Upgrades and here the best practices for the MR's. https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/Best_Practices_for_Meraki_Firmware#Best_Practice_for_MR_Firmware do the upgrade and check afterwards if you still have the disconnects. hope this helps roger

rwiesmann · ‎05-25-2020

one more addition... https://documentation.meraki.com/SM/Other_Topics/Limited_Access_Roles you also can restrict the scope of devices or as well the features they can access roger

PhilipDAth · ‎05-19-2020

You can have multiple video walls, each with up to 16 cameras. HOWEVER, you will need a lot of GPU power to display 16 or more cameras all at the same time. Don't skimp on the GPU. I have used the Nvidia Quadro P1000 before with 16 camera video walls and it has been good (make sure you use the latest drivers). This card has four video outputs (so you can attach four monitors). If you wanted to display 32 cameras simultaneously then I would look at GPUs that were twice as powerful as the P1000. It is the video decoding performance you care about. You can also use rotating video walls, that display 16 cameras at a time, and then rotate onto the next set. This would be much kinder on the GPU. The P1000 will handle this nicely. https://meraki.cisco.com/blog/2018/10/manage-your-monitors-with-rotating-video-walls/ Actually, if it was me, upon reflection, I would use one computer with a Nvidia Quadro P1000 for every 16 cameras you want to display at the same time. I tend to use i7 CPUs with 16GB of RAM.

rwiesmann · ‎05-18-2020

Hi, check out the documentation on port forwarding. https://documentation.meraki.com/MX/NAT_and_Port_Forwarding/Port_Forwarding_and_NAT_Rules_on_the_MX Provide you here also 2 Caveats on it. https://documentation.meraki.com/MX/NAT_and_Port_Forwarding/Port_Forwarding_Caveats hope this helps you roger

Edgar-VO · ‎05-14-2020

I know that feeling.... i wanna get rid of it too..... If you find a solution to that... please share

BlakeRichardson · ‎05-05-2020

Congrats everyone. Top effort as normal!

PacerX · ‎05-04-2020

Way to go @cwf !

Adam-Baxter · ‎04-23-2020

Woo hooo I made it to tier 3 🙂 Congratulations to everyone every tier!

SopheakMang · ‎04-23-2020

You are right bro!!!

BrechtSchamp · ‎04-23-2020

@rwiesmann Yes, here's the master list: https://community.meraki.com/t5/Community-Tips-Tricks/Community-profile-badges-the-master-list/m-p/10733

rwiesmann · ‎04-23-2020

Hi Anupma, thanks for your feedback. I am not aware of any other way to get detailed info's on client usage. Just have seen this post on new API Release. https://community.meraki.com/t5/Feature-Announcements/Dashboard-API-Version-0-10-Released/ba-p/84195 There is a new call on clients...but i guess i will not release the detailed information you are looking for roger

GeorgeFrendl · ‎04-22-2020

Nice! 😍

rwiesmann · ‎04-21-2020

@PhilipDAth I like this! Thanks a lot for the great documentation to it. Gone try it!

SopheakMang · ‎04-20-2020

just keep it up guys , love you all

SopheakMang · ‎04-13-2020

Great day , Everyone Enjoy your day!!! If you think that Meraki is Great , Just give me one KUDO 😅 😅 . Don't take it too serious , I'm just joking 😊

GeorgeB · ‎04-13-2020

Correction to the above, only 2nd generation MV cameras (those with a model number ending with a 2) support RTSP. RTSP is not supported on MV21.

BrechtSchamp · ‎04-10-2020

Glad I could help! Have a nice weekend.

nikiwaibel · ‎04-09-2020

you can ask the meraki support (via support-case) to change the client VPN server default of 3des-sha1-modp1024 (= 3des-sha1-dh2) to aes128-sha1-modp2048 (= aes128-sha1-dh14) unfort, although the IPSec protocol would support it, meraki can't activate both at the same time. in case the chromebook requires sthg else, i bet you're out of luck (if your error is related to this).

rwiesmann · ‎04-07-2020

Happy that I could help you Thomas Roger

WWWolf · ‎04-03-2020

Great find @Doug100 I don't really have time to fully test that right now but it looks like a solid solution that should work for most users. Unfortunately it relies on the client having the vpnclient module (https://docs.microsoft.com/en-us/powershell/module/vpnclient/?view=win10-ps) installed which I believe is limited to Windows 10 (possibly 8.1 - please correct me if I am wrong). Of course, by now hopefully there aren't too many pre-Windows 10 systems hitting your networks but we all know many organizations are still using at least some Windows 7 systems. Also, I do believe that script requires elevation of privileges to run so it will require you to utilize a remote management solution (not a deal-breaker but slightly more overhead than an email and phone call). All said, the PowerShell option is perhaps the preferred option IF your clients are running current versions of Windows and you have a way to gain access to them. Otherwise, the .pbk file may be an ideal solution for at least a temporary workaround.

Nikolai_Borhart · ‎04-03-2020

Thanks!

rwiesmann · ‎04-01-2020

@DarrenOC Congratulation and well deserved! Great to read the post about you.

SJones · ‎03-31-2020

Neat idea 👍 I just did FIT L1 yesterday.... so that helped 😁

rwiesmann

Roger Wiesmann

Community Record

Badges