cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Layer 3 Routes

Highlighted
Kind of a big deal

Layer 3 Routes

I'm cloning a replacement switch.  Doesn't look like it clones or moves over the layer 3 interfaces and routes.  Is there a good procedure for that other than documenting and remaking them all?

 

Edit:  Figured it out.  Can check the box and move them to the new switch presumably before hooking it up.  

Adam R MS | CISSP, CISM, VCP, MCITP, CCNP, ITILv3, CMNO
If this was helpful click the Kudo button below
If my reply solved your issue, please mark it as a solution.
1 REPLY 1
Highlighted
Meraki Employee

Re: Layer 3 Routes

Yes, you found it.  On the Switch > Routing & DHCP page, select the interface and there should be a grayed-out "Move" button that becomes active when you've checked one or more interfaces, when you drop it down, you can select which other switch (or switch stack) in the network to move them to.

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.