@AmitPanchal I don't think the TAC is clear on what they have and how the health checks suppose to work. Not all IPSEC hubs have Internet access. What happens when a hub doesn't have Internet access? This feature in my opinion even though It is posted and announced is just broken as previously stated.
... View more
If you use subscription licences, you bind a network to a specific subscription. All devices in the network must have the same licences, but you can have different licences from network to network (based on the subscription they are bound to).
... View more
That was just when the old core was connected. When thinking again, I am not sure anymore if this symptom will be seen as the MX is transparent for the Catalyst to Catalyst communication. In general, the more separation we have between these worlds the better.
... View more
Thanks everyone, using VLANs instead of subnet CIDR did the trick after waiting 20 odd mins. L3 interfaces are setup on the MX and I was pinging devices on the subnets not the L3 interfaces.
... View more
Okay thanks. You confirms to me that I'm unable to upgrade a single switch-stack on my own and stop the job here. It was also only for test purpose. I will of cause prefer to have all switches on the same firmware. Otherwise Meraki Support has to be involved. - Thanks again. 🙂
... View more
We have got MA-SFP-10GB-SR SFP but it is not fitting properly in Meraki MX250 firewall WAN port which is SFP+ port. Also when we connect MA-SFP-1GB-TX it it fitting properly and also working. So could you please confirm whether the MA-SFP-10GB-SR SFP is compatible with SFP+ port of firewall.
... View more
