Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About AmitPanchal
Community Record
13
Posts
9
Kudos
2
Solutions
Badges
4 weeks ago
2 Kudos
Try connecting the laptop to the same camera port and check what IP it is getting. If it is getting the same 192.168.3.X series IP then on the laptop you will get the DHCP server details through which you could identify which DHCP server/system is creating the issue.
... View more
4 weeks ago
3 Kudos
Solved this issue by upgrading the switch firmware to the stable release candidate version.
... View more
a month ago
2 Kudos
Are the L3 VLAN interfaces configured on the firewall. If No then these rules are of no use. Also try by creating a vice-versa rule like from testing to default and from default to testing and then check.
... View more
Nov 13 2024
6:03 AM
2 Kudos
Then you can use reschedule or the defer option to shift the upgrade date to the later on. Also if you want some switches to be on the other firmware Meraki support will help you in doing that from backend and rest of the switches will be on the same firmware.
... View more
Nov 13 2024
2:21 AM
Hi, You can cancel or rollback the upgrade process by going to the Staged upgrades under Switch tab. And then selecting the rollback option. Below is the documentation for your reference. https://documentation.meraki.com/MS/Firmware/MS_Firmware_Upgrades
... View more
Nov 6 2023
9:25 PM
Also if there's an DNS issue why I am not able to ping my internal network?
... View more
Nov 6 2023
8:36 PM
We are using 8.8.8.8 as our primary DNS server and 4.2.2.2 as secondary DNS server for all the network devices. Also this alert is showing only for some switches.
... View more
Nov 2 2023
4:55 AM
Yes I am able to ping the DNS server. But the alert stays for only few minutes and during that period the whole internal network goes down.
... View more
Nov 1 2023
9:50 PM
Switches are showing Disables switch (Bad DNS). Also checked the logs for loop but didn't get any. The whole network is of Meraki switches.
... View more
Aug 29 2023
4:40 AM
The SD wan preference works only with Meraki to Meraki VPN and not with non-Meraki VPN peer. So is there any other solution to this?
... View more
Aug 24 2023
8:41 PM
We have 2 ISP which have been terminated on the Meraki firewall. We want internet from ISP 1 and site to site VPN tunnel to be from ISP 2. I had configured preference under SDWAN but it is not happening. Could you please let me know how can I achieve it.
... View more
Labels:
- Labels:
-
3rd Party VPN
-
Firewall
Jun 21 2023
2:43 AM
We have got MA-SFP-10GB-SR SFP but it is not fitting properly in Meraki MX250 firewall WAN port which is SFP+ port. Also when we connect MA-SFP-1GB-TX it it fitting properly and also working. So could you please confirm whether the MA-SFP-10GB-SR SFP is compatible with SFP+ port of firewall.
... View more
Jun 3 2023
4:01 AM
What are the supported 10gb SFP for WAN ports in MX250 firewall.
... View more
Labels:
- Labels:
-
Firewall
My Accepted Solutions
| Subject | Views | Posted |
|---|---|---|
| 215 | 4 weeks ago | |
| 283 | Nov 13 2024 6:03 AM |
My Top Kudoed Posts
| Subject | Kudos | Views |
|---|---|---|
| 3 | 215 | |
| 2 | 458 | |
| 2 | 632 | |
| 2 | 283 |
© 2024 Cisco Systems, Inc.
