Meraki

speakerfritz · ‎Dec 7 2022

Also they may be able to get $30 high speed Ethernet on their own. im pay 30 for 1g from T-Mobile using their internet gateway device. and that comes with roadside assistance for free apple TV interface 2gb cloud storage and some other stuff.

speakerfritz · ‎Dec 7 2022

I don’t think the Meraki go platform would make the ma. Use of the 5g ISP bandwidth.

speakerfritz · ‎Dec 7 2022

Where is the best place to buy LIC-GX-UMB-1Y LIC-GX-UMB-1Y Is the license key for the Cisco System umbrella/openDNS integration.

speakerfritz · ‎Dec 7 2022

Thanks to whoever sent me the link. password was reset and I’m in.

speakerfritz · ‎Dec 7 2022

how do we fix this cant login to the dash board …keep getting this. someone send me a reset link. I can’t manage my equipment not sure why Meraki go did this.

speakerfritz · ‎Dec 7 2022

you are part of a subset being asked to change your passord , go to meraki go website I go to the meraki go website and I get forced into "send you a password reset link", which never comes. so...now i cant access my devices cant do a support ticket since I cant login in. marvelous.

speakerfritz · ‎Nov 14 2022

Ok will have to check into that. last month my main isp Went up and down a few times. my saving grace was that endpoints had my alternate wifi network info so end points switched over automatically. But it wasn’t going thru the Meraki go hardware. will try this over the next few days.

speakerfritz · ‎Nov 14 2022

I dont see anything in the FW xonfig for port two given the option of using as an internet port????? what FW firmware version? was this done via mobile device software or internet web sodtware? thanks

speakerfritz · ‎Nov 14 2022

interesting will have to try this has anyone else done this?

speakerfritz · ‎Nov 4 2022

yes meshed i suspect if unmeshed, thru out from APs would be higher.

speakerfritz · ‎Nov 3 2022

I speed tested my gx50 from ports on the gx50, ports on the 1sst switch, devices connected to APs. from physical ports I got 800mb. from APs I got 300mb.

speakerfritz · ‎Oct 5 2022

also...you mimght want to start a new thread....this thread is marked as solved...so if oyu want help...start a new thread and also submit a specific ticket. good l;uck.

speakerfritz · ‎Oct 5 2022

it sounds like you are saying since your iphone app has demonstrated it can remove and add an AP, you want to do the gx50 using your local apps as well (iphone app or wha ever). up to you...but there is a difference with removing/adding a switch or AP than a gateway....once you remove your gateway...all your devices are off line. and yes...if you do not want to use https://web.meraki-go.com/#login , then yes....someone else will have to get involved and make the changes for you.

speakerfritz · ‎Oct 5 2022

Use the cloud software https://web.meraki-go.com/#login log in and make sure your gx20 is deleted in the cloud software. as soon as you delete the gx20, all your devices will show off line. So you will need another way to temporarily manage your Meraki go network with the cloud software. the local software will eventually sync up.

speakerfritz · ‎Oct 5 2022

Yes, the delete button on the device in the cloud device list. as soon as that sync’s, your entire device list will show as off line until the gx50 is installed.

speakerfritz · ‎Oct 5 2022

When I upgraded from gx20 to gx50 i removed the gx20 in both the cloud app and the iPhone app. waited 5 minutes then did a normal gx50 add. once I did that , I had a gx50 error until the new fox 50 synced up. took about 15 minutes for the cloud app and iPhone app to sync up.

speakerfritz · ‎Oct 2 2022

Also what is ip’s of the first good router what is the ips of the second good router what is the ips of the Meraki go dhcp? what is the carrier ip address of the iPhone service provider is the carrier up address network the same ip of the Meraki go dhcp.

speakerfritz · ‎Oct 2 2022

What are the network ip’s on the two routers that work ok vs the Meraki go router? any chance of a double nat ?

speakerfritz · ‎Sep 28 2022

I aksed this question a few weeks ago . I had a GX20 , bought a GX50, and wanted to give the GX20 to my son who lives elsewhere. The answer I got was to remove the GX20 from my email address account and add it to a new email address account that represents the new location. I have not tried it yet....I dont see why this would not work in your case.

speakerfritz · ‎Sep 21 2022

since you mentioned 2.5ghz vs 5ghz items....you can try "dual band operaton with band steering" instead of selecting 2.5ghz or 5ghz. to do that select the wireless network select settings select advnaced settings select radio settings select "dual band operaton with band steering" instead of selecting 2.5ghz or 5ghz.

speakerfritz · ‎Sep 12 2022

This means there is about 15% bandwidth cost penalty using the gx50. Which is expected on this type of firewall.

speakerfritz · ‎Sep 12 2022

Got a pm asking me to post my link speed using a laptop plugged into isp port. Well , here it is.

speakerfritz · ‎Aug 25 2022

I had no luck getting them to power my meraki go APs. not even 1 AP.

speakerfritz · ‎Aug 25 2022

page 5 of the manual shows lan and wan ports. is your vr1600 connected to the internet via an ethernet canle from 1600v wan port to service provide modem? the FW would go between isp modem and vr1600. I dont see an rj45 on the vr1600v on pag 5.

speakerfritz · ‎Aug 25 2022

have you select see all ports go to setings pick the selction > to the right of the intended port when you get to port information, select settings at the upper right select the slider to enable the port select save

About speakerfritz

speakerfritz

Community Record

Badges