My TAC case, the engineer gave a template about acknowledging my escalation and I did not see a Manager own it up. (signs of an ailing hierarchy)   However, this community is good, Rodrigo responded promptly and help through. Thanks Meraki Community!.  ... View more

SD-WAN Plus Licence.  See Meraki Insight EOL - The Meraki Community ... View more

May want to try looking into this again. I recently noticed that many of my Amazon Echos which were previously showing up as XBOX are now showing up as Amazon Technologies. I noticed a number of other random devices much easier to identify as well.  ... View more

These are 2 Racks recently done bij me, april 2024, i used Unifi slim Patchcables CAT6: Before P1 After P1 Before P2 After P2 ... View more

I just ran across this post... It's been a few years and I wanted to see how things are going with your network?  ... View more

Great - glad it helped! ... View more

Hooray! We have some new Visio shapes! These were a side project of a Meraki employee, @DrDray - so they're not in the official Visio .zip file on cisco.com but.... take a look! https://community.meraki.com/t5/Dashboard-Administration/Meraki-SVGs-Visio-LucidChart-Stencils/m-p/215661 ... View more

For MX68's, since not very long you can see what client is connected to what MX68 port in the Clients overview. ... View more

Cool contest! ... View more

I have the nighthawk router as well. If this worked for you please let me know what settings you used on the router  ... View more

Ok, aquí vamos de nuevo!!!, Here we go Again!!! ... View more

Congratulations! Let me get on yall's level!! #merakimagic ... View more

14.33 is now a stable release so I'd upgrade to that if you haven't already? ... View more

Correct, use to do this before MX15 firmware and above. They appear to have removed a basic SD-WAN feature as there obviously wasn't a device/hardware limitation.  ... View more

just saw this discussion, sadly I had no luck with my MX68 and also not with the Z3 ... 😞 ... View more

You can't @Dunky.  You need to either use VPN firewall rules to prevent the sites from talking to each other or use a VMX in Azure and make only it the hub.   Even if you use a VMX as a hub, all the sites will still be able to talk to each other, they'll just route via the VMX in Azure, so you would still need VPN firewall rules.   https://documentation.meraki.com/MX/Site-to-site_VPN/Site-to-site_VPN_Firewall_Rule_Behavior  ... View more

It might work if you create a group policy and attach it to that client.    That’s when the layer 7 will kick in.  Since group policies are stateless. ... View more

@jpier I agree with you that Postman is one great way to make multiple updates with only a few quick changes. You can also take this one step further and use a scripting language like Python to access the APIs.   Another path you may want to consider is using the Policy Objects for the firewalls (yes, its beta, but its been around a while now, and there are great successes with it). You define organisation-wide Policy Groups which you can then use in your inbound and outbound firewall rules (they don't work on Group Policy, yet). Then if you need to make a change you just update the Policy Object and its applied everywhere that policy is used. ... View more

I had the same issue with a Meraki MX64 today. I deauthorized and reauthorized the user from the dashboard and my problem was solved. I hope this helps. ... View more

Hello.. I would like to know how to deep dive the packet loss in order to find out the exact issue causing the loss. As Chaitanya mentioned, ISP was saying that nothing wrong we as client keeps getting packet loss. ... View more

The Meraki ECMS2 page says there are virtual session being run. Can they at least share upcoming dates so we can speak to our Meraki Reps/DAMS ... View more

Thanks @KRobert! There was a sys admin/network admin that taught me a ton at my previous job and I am very grateful for that! I already know the community input is much better than the Red Wings! Although, that isn't too hard to make that comparison with this season's results 😉 ... View more

Nice! ... View more

you make me want to dig up some old programmable LED sign boards!!!  never waste energy or a good thought! Cheers! ... View more

Hi viksep   You will need to configure the RADIUS server under [radius client] section then under [radius server auto] you will need to input the MX details to act as a client. if you are running this DUO proxy on the same machine as your RADIUS server then please change the port of the proxy from 1812 because that is what I am assuming you are using for your RADIUS server already so DUO proxy has to listen to a different port to authentication users.   Please check my short video of the integration but note that I used direct integration with AD instead of RaDIUS but the concept is the same.   https://www.youtube.com/watch?v=0kmNsun48Wc&t=20s ... View more