CONGRATS! ... View more

Thanks @lBayonetta  for sharing that potential workaround with the community! If you or anyone else is experiencing this issue, the Meraki Support team will be best equipped to help. There are many variables at play here, such as the device, firmware, etc. Support will be able to investigate and give the most accurate information to your partiuclar situation.   You can open a case through the Meraki Dashboard or by calling +1 (415) 937-6671. If you need detailed steps on how to open a case, more info can be found on the Contacting Support page . We are always working to improve our services and will be happy to help! ... View more

So in the effort for full transparency, we finally did get a response from support about our IPv6 WAN issue. They confirmed it doesn't work. No ETA on a resolution.   6 months it took for that response. ... View more

We haven't found a workaround yet but to be honest we've been pretty busy and haven't really looked. It will likely require a patch/change from Meraki. Their AD authentication method is dated anyways, and we brought it up years ago. So.... ... View more

Is WEP still the encryption for mesh networking between the APs? ... View more

I'll follow up with Spectrum on that and see what they say. This thread has been much more constructive so far than my support ticket, so I'm very appreciative!   Are there any behind the scenes logs that may or may not show what the MX is doing when I turn on the IPV6? It "thinks" it is connected as it shows the assigned /127 being green, but I'm not sure what logic it uses to determine that. ... View more

Same things here. Blocked DNS requests as "XBOX Live" 😞   Disabled NBAR in Traffic analysis but i would like to maintain it to "detailed" and "all gaming" L7 rules! Please fix!     ... View more

Check which flags are set in the RA,  I recall that there were some issues with Charter during the Beta.   Here is a potentially useful discussion of the RA Flags   https://blog.ipspace.net/2012/11/ipv6-router-advertisements-deep-dive.html   -Dave ... View more

@giovanitestoni wrote: I recommend you to request change subnet to /64. A national carrier isn't going to change the way they assign IPs for a one-off. ... View more

I'm guessing EE have got IPv6 to IPv4 working properly then, which is good 👍 ... View more

There's no way to tell, given just this information, whether the MT is faulty or not.   I would try moving some of your MT11s around, if you can and see how things change (or not) between sensor and environment.  In particular, if you have another one providing the kind of values you expect, could you deploy it, for a short time, alongside the existing one, to see how their results compare?   I've found that humidity changes quite a lot, in relatively short periods of time, in some environments. ... View more

@CarolineS too early for us west coast folks 🙂 ... View more

Hello.. I would like to know how to deep dive the packet loss in order to find out the exact issue causing the loss. As Chaitanya mentioned, ISP was saying that nothing wrong we as client keeps getting packet loss. ... View more

If you have a floor plan of where you are installing the camera, you can use the Meraki Camera Blueprint URL below to plan and check what the picture quality will be at different distances from the camera.   https://meraki.cisco.com/public/mv-site-survey/index.html  ... View more

The world of onsite work has been at a stop, but things carry on. Some home configuration and then deployed in situ!       ... View more

The problem is VPN, Because Meraki MX made Auto VPN, all subnet still can see each other, go to SITE TO SITE VPN and make rule there as well. ... View more

well, in europe you may use channel 12 and 13 also. so there is 2 non overlapping 2.4ghz/40mhz channels: 3 and 11   further, i wonder why meraki uses 1 6 11 for autochannel only. having 12 and 13 available in addition, 1 5 9 13 is valid option as well.   hiding the option to choose 40mhz channel at 2.4ghz - at least manually - is not okay, @Meraki-PM-Team! same applies to 1 5 9 13 autochannel, in case 12/13 is available, IMHO. ... View more

Has anyone found a solution for this?   I am thinking about creating something. Would you be okay with just an EXE and a config file with Video Wall URL, username and password stored in it?    One of the challenges I am coming up against is a good way to securely store the password but still have the Video Wall Auto Login.    Thoughts / Ideas?      ... View more

This was a cloud-based change, does not require any firmware changes. ... View more

Keeping up with our pace of development, in API space, can be difficult. Try keeping an eye out, here:  https://developer.cisco.com/meraki/whats-new/ ... View more

You cannot disable this completely on an MX, unfortunately.  We seem to have found a workaround, though:   Minimize the power of the 2.4 GHz band to make it virtually invisible by setting it to 1 dbm.   Go to Security & SD WAN -> Wireless Settings Scroll all the way to the bottom of the page Change the Transmit Power for the 2.4 GHz band to 1 dbm Click Save Changes Of course, don't do this if you have any devices that cannot use 5 GHz, because those devices will no longer be able to connect. ... View more

I tried to contact Meraki when a distribution center was first sent and inquired as to whether they could sign on and examine over the occasions and simply affirm they are seeing no issues before it went into generation - all I got was 'on the off chance that you don't have an issue, we don't have anything to check' was not so much the appropriate response I needed...   https://theessayservice.org ... View more

Hello, I myself have been experiencing this issue on my network. This are the things that worked for us, we first checked the signal strength of the channels affected. We determined that there was a range of 3dB - 6dB very low. We changed the channels and within minutes the signal on the clients increased significantly to a 20dB.  I would suggest checking your signal and channels. I realized that in this AP auto channel selection is not working. It seems like I have to be switching channels constantly myself. Today I found out that the AP was located next to two glass windows. I suspect this is the root cause I hope it helps.  ... View more

I don't blame them @TNelson .  An MR18 is only 802.11n while an MR33 is 802.11ac.  They are going to prefer an 802.11ac AP over an 802.11n AP as it has the potential for much higher performance. ... View more