Take a look at "Where should users go after splash page?". https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Splash_Page_Frequency#Click-through_or_Sign-on_Splash_Page
... View more
I think the random MAC address in the SSID privacy options of devices is the one affecting this issue. IOS devices are enabled by default and change every 2 weeks. https://support.apple.com/en-us/102509 https://discussions.apple.com/thread/254895025?sortBy=rank
... View more
Are you using the built-in Meraki splash page or from an external portal? Do you have the same VLAN for that SSID? What authentication server are you using?
... View more
We are using Meraki's local DHCP. Most of these APs with lots of zero IP's are installed in common hallways where a lot of clients just pass by. I'm thinking maybe due to their fast movement, since they just passed by, they were not given any IP addresses.
... View more
Wow, good for you. We still have around 300 plus MR33's in our campus, the rest are MR44 and MR56. We still have not decided to disable the 2.4Ghz since there are still some legacy devices that may need them. I have just adjusted the radio profiles to lower power settings on the 2.4Ghz to keep the congestion and latency lower.
... View more
if you are mainly looking at push notification capabilities for any failure, new Alert hub offers notification via Webhook or Email across 167 different alert types that can be configured all networks across your organization. Apart from it, you can also configure syslog server at the network level to receive the syslog notification
... View more
In most cases, if AI-RRM expires, your network will gracefully return to standard RRM functionality without requiring extensive manual intervention.
... View more
I enabled all three options a month ago, and the report has improved dramatically. Identify how much interference we get from the neighbor AP and the neighbors. Based on that, we did a few fine-tunings, and it works well.
... View more
Yes, we have opened this case with Meraki. Still waiting for updates. They have replaced some of those units with multiple unplanned reboots. We have lots of this scenario on MR33.
... View more
Is there a document showing how many users an AP can support at maximum? They only put the ideal or optimal number of users that it should support. I have the MR33, MR36, MR44, MR52, MR56, MR86 models on our network.
... View more
